Hubbell Incorporated
Hubbell Incorporated DT2000W Digital Timer 120/277V White
A digital wall-switch timer with configurable audible alerts, 5-minute to 4-hour countdown range, and 120/277 V AC operation rated for 960/1200 watts
- Digital countdown timer with configurable audible alert
- Operates on 120/277 V AC circuits up to 1200 W
- Electronic switch handles 1/6 hp motor loads at 120 V
- Meets CEC Title 24, cULus UL773A and ASHRAE 90.1 standards
- Single-gang wall-switch design with 5-minute to 4-hour range
Digital countdown timer for commercial lighting
The Hubbell DT2000W is a wall-switch electronic timer rated for 120/277 V AC circuits. It handles up to 960 W at 120 V and 1200 W at 277 V with an 8.30 A load. The unit suits offices, warehouses and retail spaces that need automated on/off control for lighting or small motor loads up to 1/6 hp.
Single-gang white wall switch with audible alert
The device fits a standard one-gang box and presents a clean white finish. Its electronic switch supports three-way wiring configurations so the timer can be controlled from two locations. A configurable audible alert signals the end of a countdown cycle, and the timer meets CEC Title 24, cULus UL 773A and ASHRAE 90.1 standards for energy-code compliance.
Low standby draw and silent operation
Because the timer uses an electronic switching mechanism rather than a mechanical relay, it draws minimal power while idle and produces no audible click during switching. The countdown range runs from 5 minutes to 4 hours, allowing precise scheduling without continuous fan or coil noise. This keeps both energy use and acoustic disturbance low in occupied areas.
Highlights
- Digital countdown timer with configurable audible alert
- Operates on 120/277 V AC circuits up to 1200 W
- Electronic switch handles 1/6 hp motor loads at 120 V
- Meets CEC Title 24, cULus UL773A and ASHRAE 90.1 standards
- Single-gang wall-switch design with 5-minute to 4-hour range
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
What voltage range does the 120/277 V AC rating cover for this timer?
The timer operates on 120 V or 277 V AC circuits, supporting 960 W at 120 V and 1200 W at 277 V with an 8.30 A maximum load.
What wall-box depth is required to mount the 4 1/2 in × 2 in × 3 in single-gang body?
A standard single-gang wall box with at least 3 in of depth accommodates the timer’s 4 1/2 in length, 2 in width and 3 in depth.
How do you enable or disable the configurable audible alert during initial setup?
After wiring the timer, enter the programming menu, locate the audible-alert option and toggle it on or off before saving the schedule.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
