Hubbell Incorporated
Hubbell Incorporated CSB115I Wall Switch Ivory 15 A 120/277 V AC 1/2 HP Single Pole
A commercial-grade toggle switch rated 15 A at 120/277 V AC with a 1/2 HP motor rating, featuring shatter-resistant nylon housing and screw terminals for 14 to 10 AWG wire
- 15 A / 120-277 V AC rating handles heavy commercial loads
- 1/2 HP motor rating supports direct equipment control
- Shatter, crack, corrosion and impact resistant nylon housing
- Back and side wiring with 14-10 AWG screw terminals
- UL Listed single-pole toggle switch for code-compliant installs
Ivory Toggle Wall Switch 15 A
The Hubbell CSB115I is a single-pole toggle switch rated for 15 A at 120/277 V AC with a 1/2 hp motor rating. It is built for commercial lighting circuits where a maintained contact and shatter-resistant nylon housing are required.
Verify Voltage Wiring And Box Space
Confirm the circuit operates at 120 V or 277 V AC and that the branch breaker does not exceed 15 A. The device accepts 14 AWG to 10 AWG copper conductors via back or side screw terminals, so ensure the existing box has sufficient volume for the wiring method chosen.
No Extra Hardware Or Software Included
The switch ships as a single unit without mounting screws, faceplate or configuration software. Installers must supply a compatible cover plate and fasteners, and no programming or firmware steps are needed for basic on-off operation.
Highlights
- 15 A / 120-277 V AC rating handles heavy commercial loads
- 1/2 HP motor rating supports direct equipment control
- Shatter, crack, corrosion and impact resistant nylon housing
- Back and side wiring with 14-10 AWG screw terminals
- UL Listed single-pole toggle switch for code-compliant installs
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
Does the Hubbell CSB115I come with mounting screws or a wall plate, or do I need to buy them separately?
The switch is supplied as a single toggle unit; mounting screws and a decorative wall plate are not included and must be purchased separately.
Should I choose the 15 A / 120 V version or the 15 A / 277 V version for a standard office lighting circuit?
This single-pole switch is rated for both 120 V and 277 V AC at 15 A, so one model covers standard office lighting at either voltage.
What does the 1/2 HP rating mean when the switch controls a motor load in a real installation?
The 1/2 horsepower rating indicates the maximum motor load the contacts can safely make and break at the rated voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
