We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hubbell cable support grip offset 16 inch mesh tin coated bronze transparent

Hubbell Incorporated

Hubbell Incorporated Cable Support Grip Offset 16 in Mesh 2203044

SKU CH-GG8N-63RRC

Cable support grip with 16 in mesh for 1.75 to 1.99 in cables, 2,000 lb breaking strength

  • TypeCable Management & Conduit
  • ColorTransparent
  • Supports cables from 1.75 to 1.99 inches in diameter
  • 16 inch mesh length distributes pulling force evenly
  • Tin coated bronze material resists corrosion for long life
  • CSA certified construction meets safety standards
  • 2000 lb breaking strength handles heavy cable loads

Cable Support Grip Offset 16 in Mesh

The Hubbell Incorporated cable support grip provides strain relief for cables measuring 1.75 in to 1.99 in diameter. Its 16 in mesh length and offset eye style suit commercial and industrial routing where cables must be pulled through conduit or tray. Tin coated bronze construction resists corrosion in damp environments.

Installation and common issues

The rod closing grip slides over the cable jacket and locks without tools, while the offset eye aligns with existing hardware for direct attachment. Installers sometimes select a mesh that is too short for the pull distance, causing the grip to slip under the 2,000 lb breaking strength rating. Verify the eye length matches the mounting point before tensioning.

Compatibility checks before ordering

Confirm the cable outer diameter falls within the 1.75 in to 1.99 in range so the mesh achieves full contact. Check that the mounting structure accepts a 6 in offset eye and that the pathway allows the full 16 in mesh length without sharp bends. Ensure the application does not require a different grip style or material finish.

Highlights

  • Supports cables from 1.75 to 1.99 inches in diameter
  • 16 inch mesh length distributes pulling force evenly
  • Tin coated bronze material resists corrosion for long life
  • CSA certified construction meets safety standards
  • 2000 lb breaking strength handles heavy cable loads

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit
ColorTransparent

Questions about this item

How do I verify the grip is working correctly after installation?

After fitting the grip, confirm the cable diameter falls within the 1.75 in to 1.99 in range, the mesh sits evenly over the 16 in length, and the eye aligns with the 6 in offset without slipping under load.

What comes in the package and what must I source separately?

The package contains the single offset cable support grip with tin coated bronze mesh and integrated eye; mounting hardware, conduit fittings and cable are not included.

Which cable diameter range should I select for my application?

Choose this model when your cable outer diameter measures between 1.75 in and 1.99 in; the grip is rated for a 2,000 lb breaking strength and carries CSA certification for that range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.