We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory wall-mount occupancy sensor with single button

Hubbell Incorporated

Hubbell Incorporated AP2000I1 Wall Mount Sensor

SKU CH-W1SM-HQGYD

Wall-mount occupancy and vacancy sensor controlling fluorescent or incandescent loads up to 1,000W at 120–277V AC with 1,000 sq ft PIR coverage

  • Automated lighting control with occupancy and vacancy detection
  • Operates on 120 to 277V AC for versatile installation
  • Passive Infrared sensing covers up to 1000 sq ft
  • Handles 800W incandescent and 1000W fluorescent loads at 120V
  • No neutral wire required for simpler wiring

Wall-Mount Occupancy Sensor

The Hubbell AP2000I1 is a hard-wired passive infrared sensor designed for commercial lighting control. It mounts on a wall and switches connected loads automatically based on detected motion. The unit operates on 120 to 277V AC circuits and covers up to 1,000 sq ft. No neutral wire is required for installation.

Suited for Fluorescent or Incandescent Loads

This sensor handles fluorescent ballasts up to 1,000W at 120V AC and incandescent loads up to 800W. It offers both occupancy and vacancy operating modes with a single button interface. Builders needing dimming control, a nightlight feature, or compatibility with LED drivers not listed above should look at other models.

Voltage Range 120 to 277V AC

The operating voltage window of 120 to 277V AC determines whether this sensor matches the supply circuit. Verify the site voltage before ordering; the device will not function outside this range.

Highlights

  • Automated lighting control with occupancy and vacancy detection
  • Operates on 120 to 277V AC for versatile installation
  • Passive Infrared sensing covers up to 1000 sq ft
  • Handles 800W incandescent and 1000W fluorescent loads at 120V
  • No neutral wire required for simpler wiring

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

Should I pick the occupancy or vacancy setting for my space?

Choose occupancy mode when you want lights to turn on automatically as someone enters and off after the area is empty. Choose vacancy mode when you prefer to press the button to turn lights on and have the sensor turn them off when the space is vacated.

What does the 1,000 sq ft coverage mean once the sensor is mounted on the wall?

The passive infrared sensor detects motion across up to 1,000 square feet of floor space when mounted at the recommended height, so a single unit can control lighting in a large conference room, open office or warehouse aisle without additional sensors.

How does the hard-wired 120 to 277 V AC connection affect what I can control?

The sensor switches the load directly on the same circuit, handling up to 1,000 W of fluorescent or 800 W of incandescent lighting at 120 V AC, and it operates on any voltage from 120 to 277 V AC without a neutral wire.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.