We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pulling grip with flexible eye, 1.00-1.24 in cable range, closed mesh, gold color code

Hubbell Incorporated

Hubbell Incorporated 3302050 Pulling Grip Flexible Eye 1.00-1.24 in

SKU CH-S7PV-0S24S

A flexible-eye pulling grip handles cables from 1.00 to 1.24 in diameter with 24,600 lb breaking strength and 52 in galvanized-steel mesh

  • TypeCable Management & Conduit
  • Fits cables 1.00 to 1.24 in diameter for secure pulling
  • Closed mesh galvanized steel construction delivers 24 600 lb breaking strength
  • Flexible eye with .5 in inside diameter eases alignment in tight spaces
  • 52 in mesh length distributes tension evenly along the cable
  • UL listed and CSA certified for code-compliant installations

Pulling Grip for 1.00-1.24 in Cables

The Hubbell 3302050 pulling grip is built for electricians and line crews who need to pull cables measuring 1.00 to 1.24 inches in diameter. A flexible eye and closed-mesh design distribute tension evenly across the galvanized-steel weave. The grip meets CSA and UL listings for code-compliant installations. It is rated for a breaking strength of 24,600 lb.

Flexible Eye and Closed Mesh Benefits

The flexible eye measures 12 inches long with a 0.5 inch inside diameter, allowing it to articulate around bends and sheaves without binding. Closed mesh construction prevents the grip from opening under load, while the 52 inch mesh length spreads pulling force over a large surface area. A gold colour code helps crews identify the correct size range quickly on a busy job site.

Simple Installation and Common Issues

Slide the grip over the cable end and secure the mesh bands; the flexible eye then attaches to a pulling line or winch hook. Installers must verify the cable diameter falls within the 1.00 to 1.24 inch range, otherwise the mesh will not develop full holding power. Over-tightening bands or using a damaged grip can reduce the rated breaking strength.

Highlights

  • Fits cables 1.00 to 1.24 in diameter for secure pulling
  • Closed mesh galvanized steel construction delivers 24 600 lb breaking strength
  • Flexible eye with .5 in inside diameter eases alignment in tight spaces
  • 52 in mesh length distributes tension evenly along the cable
  • UL listed and CSA certified for code-compliant installations

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit

Questions about this item

When should the flexible eye or mesh be inspected for wear?

Inspect the galvanised steel mesh and flexible eye after each heavy pull; replace if strands are frayed or the 0.5 in eye shows deformation.

What load limit governs sustained pulling with this grip?

The rated breaking strength is 24,600 lb; apply a safety factor for continuous tension so the working load stays well below that figure.

How hot does the galvanised steel get during all-day pulling?

The steel mesh dissipates heat quickly; under normal all-day use it remains near ambient temperature and does not require cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.