We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight aluminum liquid-tight connector with stainless steel mesh strain relief, 4.62in external length, silver body

Hubbell Incorporated

Hubbell Incorporated 074-01-019 Liquid-Tight Connector 4.62in Strain Relief video accessory

SKU CH-DKPD-HCPPA

A liquid-tight aluminum connector with stainless-steel mesh strain relief secures cords from .50 to .63 in. diameter

  • TypeLiquid-Tight
  • Length9.300
  • ColorTransparent
  • Weight0.3
  • Aluminium fitting and stainless-steel mesh resist corrosion
  • Liquid-tight seal protects cords from moisture ingress
  • Strain-relief mesh supports cable over 4.62in length
  • Accepts cord diameters from .50in to .63in
  • UL and CSA listed for code-compliant installations

Liquid-Tight Connector for Cable Protection

This Hubbell wiring accessory is a straight liquid-tight cord connector built for industrial and commercial installations. It secures a single cable with a diameter between 0.50 in and 0.63 in using a stainless steel mesh strain relief. The aluminum fitting connects to a 1 in MNPT box entry. It meets CSA and UL standards for safety compliance.

4.62 in Strain Relief and Cord Range

The external mesh strain relief extends 4.62 in to distribute pulling force and prevent cable fatigue at the termination point. The connector accepts cords ranging from 0.50 in to 0.63 in, providing a secure seal within that specific window. Cables thinner than 0.50 in or thicker than 0.63 in cannot be accommodated by this fitting. The aluminum body and stainless mesh resist corrosion in damp environments.

1 in MNPT Interface and Installation Limits

The connector mounts via a 1 in male NPT thread, limiting use to enclosures with a matching threaded hub or knockout. The overall length from box face to connector end is 1 5/8 in, defining the internal space required. The fitting is not insulated, so grounding continuity relies on the metal-to-metal connection. It is restricted from sale in certain states per local regulations.

Highlights

  • Aluminium fitting and stainless-steel mesh resist corrosion
  • Liquid-tight seal protects cords from moisture ingress
  • Strain-relief mesh supports cable over 4.62in length
  • Accepts cord diameters from .50in to .63in
  • UL and CSA listed for code-compliant installations

Specifications

BrandHubbell Wiring Device-Kellems
Model074-01-019
TypeLiquid-Tight
Length9.300
ColorTransparent
Weight0.3

Questions about this item

Will this 1 in MNPT liquid-tight connector thread onto the existing 1 in NPT port on my older junction box?

Yes, the 1 in MNPT box connection matches standard 1 in NPT threads so it will screw directly onto your existing junction box.

How can I confirm the stainless-steel mesh strain relief is properly engaged after installation?

The mesh should grip the cable evenly over its 4.62 in length and the connector body should sit flush with the box face at 1 5/8 in from the box to the end of the connector.

Does the package include a sealing gasket or locknut for the 1 in MNPT connection?

The supplied unit is the aluminum cord connector with stainless-steel mesh strain relief only; a gasket and locknut for the 1 in MNPT thread are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.