We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel cable support grip with closed mesh and eye end

Hubbell Incorporated

Hubbell Incorporated 073041278 Bus Drop Cable Support Grip video accessory

SKU CH-N3ZD-B3HHR

A galvanised-steel cable support grip holds 0.43–0.56 in diameter cables with a 550 lb breaking strength and UL listing

  • TypeCable Management & Conduit
  • ColorTransparent
  • Supports cables from 0.43 in to 0.56 in diameter
  • Closed-mesh grip distributes load evenly across the cable
  • Galvanised steel construction resists corrosion in harsh environments
  • 550 lb breaking strength handles heavy bus-drop runs
  • UL Listed for verified safety compliance

Cable Support Grip for Bus Drops

This galvanised steel grip supports cable diameters from 0.43 in to 0.56 in with a 550 lb breaking strength. The closed mesh design extends 4 3/4 in and features a 6 in eye for secure attachment. It is UL Listed and suited for indoor or outdoor bus drop installations where reliable cable suspension is required.

Practical Limits of the Grip Range

The grip only accepts cables within the stated 0.43 in to 0.56 in diameter range; smaller or larger cables will not be held securely. Maximum load must not exceed the 550 lb breaking strength under any condition. The fixed mesh and eye lengths determine the minimum hardware spacing needed for proper mounting.

Check Your Cable and Mounting Points

Verify that the cable outer diameter falls inside the 0.43 in to 0.56 in window before ordering. Confirm the structure can accommodate the 6 in eye length and that the 550 lb rating meets the calculated tension for the specific span. No additional hardware is included with the grip.

Highlights

  • Supports cables from 0.43 in to 0.56 in diameter
  • Closed-mesh grip distributes load evenly across the cable
  • Galvanised steel construction resists corrosion in harsh environments
  • 550 lb breaking strength handles heavy bus-drop runs
  • UL Listed for verified safety compliance

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit
ColorTransparent

Questions about this item

Which cable diameter range should I choose for my installation?

This grip supports cables from .43 to .56 inches in diameter, so select it when your cable falls within that range.

What does the 550 lb breaking strength mean once the grip is installed?

The 550 lb rating is the maximum load the galvanized steel mesh can withstand before failure, setting the safe working limit for the supported cable run.

How does the UL Listing affect the way I can use this support grip?

UL Listing confirms the grip meets the safety standard for cable management, allowing it to be used in inspected electrical installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.