We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent mesh cable support grip with eye loop, tin-coated bronze, 19 1/2 in mesh length, 16 in eye length

Hubbell Incorporated

Hubbell Incorporated 02203021 Cable Support Grip 2.00 to 2.49 in

SKU CH-R8NP-E7PBR

Supports cables 2.00 to 2.49 in diameter with a 3,260 lb breaking strength, 19 1/2 in mesh and 16 in eye length

  • TypeCable Management & Conduit
  • ColorTransparent
  • Supports cables 2.00 to 2.49 in diameter
  • 3,260 lb breaking strength for heavy loads
  • 19 1/2 in mesh length distributes grip force
  • 16 in eye length allows flexible mounting
  • Tin-coated bronze material resists corrosion
  • CSA certified for safety compliance

Cable support grip for 2.00 to 2.49 in cables

The Hubbell 02203021 cable support grip handles single cables with diameters between 2.00 and 2.49 inches. It uses an eye-style design with a rod-closing grip to distribute tension along the mesh. The tin-coated bronze construction resists corrosion in demanding environments. Installers working with heavy vertical or sloped cable runs will find this grip rated for the load.

3260 lb breaking strength and fixed mesh length

The grip provides a breaking strength of 3260 lb, which sets the absolute limit for static pulling or support force. Mesh length is fixed at 19 1/2 inches and eye length at 16 inches, so the overall reach cannot be adjusted on site. CSA certification confirms compliance with the applicable safety standard. The transparent colour allows visual inspection of the cable jacket inside the mesh.

Replaces smaller-diameter grips when cable size

This model steps up from grips rated for cables below 2.00 inches, closing the range up to 2.49 inches. The jump is worth it when the installed cable falls outside the capacity of the next size down and the 3260 lb rating meets the structural requirement. It is not for cables thinner than 2.00 inches or thicker than 2.49 inches, nor for applications needing a different mesh or eye length.

Highlights

  • Supports cables 2.00 to 2.49 in diameter
  • 3,260 lb breaking strength for heavy loads
  • 19 1/2 in mesh length distributes grip force
  • 16 in eye length allows flexible mounting
  • Tin-coated bronze material resists corrosion
  • CSA certified for safety compliance

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit
ColorTransparent

Questions about this item

Which cable diameter range should I choose for my installation?

This grip fits cables from 2.00 in to 2.49 in diameter, so select it when your cable falls within that range.

What does the 3,260 lb breaking strength mean when the grip is installed?

The grip is rated to withstand up to 3,260 lb of tension before failure, providing a safety margin for heavy cable runs.

How does the tin coated bronze mesh and CSA certification affect the grip's performance?

Tin coated bronze resists corrosion in damp or outdoor locations, and CSA certification confirms the grip meets Canadian safety standards for cable support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.