Hubbell Incorporated
Hubbell HBL67W47 Watertight Locking Receptacle 20A 125V L5-20R
Watertight flanged locking receptacle rated 20 A, 125 V AC with NEMA L5-20R configuration and screw terminals
- TypeWatertight Devices
- Watertight protection with NEMA 4X and 6P ratings
- 20 A 125 V locking receptacle for secure power connections
- Flush-mount flanged design simplifies panel installation
- Thermoplastic elastomer housing resists impact and chemicals
- Screw-terminal wiring ensures reliable conductor termination
Hubbell HBL67W47 Watertight Locking Receptacle
This Hubbell HBL67W47 is a watertight locking receptacle rated for 20 A at 125V AC. It features a NEMA L5-20R configuration with a straight connection orientation. The housing uses yellow thermoplastic elastomer and carries NEMA 12, 4, 4X, 6, and 6P enclosure ratings. It is designed for flush mounting with a rectangular flange.
Suits wet or corrosive industrial sites
This receptacle suits installations requiring NEMA 4X or 6P protection against water ingress and corrosion. The locking L5-20R interface secures the plug connection in high-vibration environments. It is not for applications needing a non-locking straight-blade outlet or a higher current rating than 20 A. Buyers needing a different NEMA configuration or phase arrangement should look elsewhere.
NEMA L5-20R locking configuration
The NEMA L5-20R configuration is the single specification that determines compatibility. It defines a 2-pole, 3-wire, single-phase grounding receptacle for 125V AC service. Only plugs matching this exact locking blade pattern will engage correctly. Verify the plug on your equipment carries the identical L5-20P designation before purchasing.
Highlights
- Watertight protection with NEMA 4X and 6P ratings
- 20 A 125 V locking receptacle for secure power connections
- Flush-mount flanged design simplifies panel installation
- Thermoplastic elastomer housing resists impact and chemicals
- Screw-terminal wiring ensures reliable conductor termination
Specifications
| Brand | HUBBELL |
|---|---|
| Type | Watertight Devices |
Questions about this item
What rectangular flange cut-out does the HBL67W47 watertight receptacle need for flush mounting?
The receptacle uses a rectangular flanged design for flush mounting; the flange shape is rectangular and the mount type is flush.
How do you wire the screw terminals on this L5-20R receptacle and which step is often missed?
Connect the three wires to the screw terminals following the standard wiring style; the step often missed is fully tightening each terminal screw to ensure a secure connection.
When should the yellow thermoplastic elastomer housing be inspected or replaced?
Inspect the yellow thermoplastic elastomer housing periodically for cracks, UV damage or seal degradation; replace it if the watertight integrity of the NEMA 4, 4X, 6, 6P rating is compromised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
