We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory polycarbonate quad receptacle with four straight-blade outlets, surface-mount design

Hubbell Incorporated

Hubbell HBL415I Quad Receptacle 15A 125V Ivory

SKU CH-CXP7-MPVDN

A 15A 125V quad receptacle with four NEMA 5-15R outlets, surface-mount polycarbonate housing, back-wired terminals for #14-12 AWG copper, UL 498 listed and CSA C22.2 No.42 certified

  • Color MappingIvory
  • TypeWiring Devices
  • Four NEMA 5-15R outlets in one device
  • 15 A, 125 V AC rating for standard circuits
  • Polycarbonate housing with brass contacts for durability
  • Back-wired terminals accept #1412 AWG copper wire
  • UL 498 listed and CSA C22.2 No.42 certified

Quad Receptacle for Commercial Use

The Hubbell HBL415I provides four NEMA 5-15R straight blade outlets in a single surface-mount device rated 15 A at 125 V AC. It is intended for indoor commercial and industrial installations where multiple connections are needed from one wiring point. The grounded two-pole three-wire configuration suits standard power distribution.

Polycarbonate Housing with Brass Contacts

A polycarbonate base and housing enclose .032" brass power contacts and a green #8-32 brass ground screw. Back-wired screw terminals accept #1412 AWG copper conductors, stranded or solid, while an anchor hole and loop feature secures solid wire. Break-off tabs allow split wiring of the four outlets when separate circuits are required.

UL 498 and CSA C22.2 No.42 Listed

The receptacle meets NEMA WD-6 requirements and is listed to UL Standard 498 and CSA Certified C22.2 No.42. It supports loads up to 1/2 horsepower on a 15 A branch circuit. The 15 A rating limits total connected load; installations needing higher current or different voltage configurations require a different device.

Highlights

  • Four NEMA 5-15R outlets in one device
  • 15 A, 125 V AC rating for standard circuits
  • Polycarbonate housing with brass contacts for durability
  • Back-wired terminals accept #1412 AWG copper wire
  • UL 498 listed and CSA C22.2 No.42 certified

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
Color MappingIvory
TypeWiring Devices

Questions about this item

What does the NEMA 5-15R rating on the Hubbell HBL415I cap in practice?

Each of the four straight-blade outlets is rated for 15 amps at 125 volts AC and supports loads up to 1/2 horsepower.

What physical space and wiring does the surface-mount quad receptacle need?

It mounts on a flat indoor surface and accepts #14-12 AWG copper conductors, stranded or solid, on back-wired screw terminals with a green #8-32 brass ground screw.

How is the Hubbell HBL415I wired, and what step do installers often miss?

Strip the conductors, loop solid wire into the anchor hole, tighten the terminal screws, and remember to remove the break-off tabs only if you intend to split-circuit the outlets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.