Hubbell Incorporated
Hubbell HBL2313SW 20A Watertight Twist-Lock Connector 2P video accessory
A 20 A watertight twist-lock connector rated 125 V AC with IP66 protection and a Valox housing
- TypeWatertight Safety Shroud Twist Lock
- ColorBlack/White
- Watertight protection rated IP66 and NEMA 4, 4X, 12
- Impact-resistant Valox housing withstands -40°C to +75°C operation
- UL94 V-0 flammability rating on insulation materials
- Accepts 16 to 8 AWG wires with .36 to .93 in cord range
- 20 A 125 V AC rating with 2000 V dielectric strength
Industrial 20 A Watertight Connector
The Hubbell HBL2313SW is a NEMA L5-20R locking connector rated for 125 V AC at 20 A. It suits industrial and commercial installations that demand a secure, weather-resistant power connection.
Installation Checks
Verify that the supply circuit matches 125 V single-phase with ground and that the cord diameter falls between 0.36 in and 0.93 in. Confirm the wire gauge is within 16 AWG to 8 AWG and that the enclosure rating Type 4, 4X, 12 and IP66 meet the site requirements.
Sustained Load Behaviour
The connector is rated for continuous operation from -40 °C to +75 °C with a maximum temperature rise of 30 °C. Its Valox housing carries a UL94 V-0 flammability classification and the brass contacts maintain dielectric strength up to 2000 V under prolonged use.
Highlights
- Watertight protection rated IP66 and NEMA 4, 4X, 12
- Impact-resistant Valox housing withstands -40°C to +75°C operation
- UL94 V-0 flammability rating on insulation materials
- Accepts 16 to 8 AWG wires with .36 to .93 in cord range
- 20 A 125 V AC rating with 2000 V dielectric strength
Specifications
| Brand | Hubbell Wiring Device-Kellems |
|---|---|
| Model | HBL2313SW |
| Type | Watertight Safety Shroud Twist Lock |
| Color | Black/White |
Questions about this item
Does the HBL2313SW come with a cord or wire, or do I buy those separately?
The connector accepts cord diameters from .36 in to .93 in and wire sizes from 16 AWG to 8 AWG; cord and wire are not included and must be purchased separately.
Which NEMA rating should I choose for a wet industrial location — Type 4, 4X, 12 or IP66?
The HBL2313SW carries all four ratings simultaneously: Type 4, 4X, 12 and IP66, so a single version covers wet, dusty and wash-down environments.
What does the 20 A / 125 V rating mean when the connector is installed in a real circuit?
It supports single-phase loads up to 20 amps at 125 V AC, with a 1 hp motor rating and dielectric strength tested to 2000 V, and operates from -40 °C to +75 °C with a 30 °C temperature rise limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



