We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White digital thermostat outlet socket, 6.3 by 8.4 by 14.5 cm, 12 pack

HUAREW HWX-Backlight Controller 110V Digital HVAC Control 12 Pack

SKU CH-09DR-001C2

A 12-pack of 110 V digital thermostats with 2.24-inch LCD, ±1 °C accuracy from -40 °C to 120 °C, 16 A relay, 1.7 m NTC probe and timer functions

  • Type1
  • Size/Dimensions6.3 cm x 8.4 cm x 14.5 cm
  • ColorWhite
  • Mount Type1
  • Operating Temperature Range120 degrees_celsius
  • Item Count12 pack
  • Clear 2.24-inch LCD shows status in darkness
  • Wide -40°C to 120°C range with ±1% accuracy
  • 16A 3680W output handles heating and cooling loads
  • 7 m NTC probe plus timing calibration and memory functions
  • Plug-play copper contacts in flame-retardant PC housing

12-pack 110V digital thermostat outlet

This pack contains twelve HUAREW HWX-Backlight Controller units designed for 110V circuits. Each controller manages heating or cooling loads up to 16A and 3680W through a built-in socket. The 2.24-inch LCD shows status clearly without a backlight. The white enclosure uses PC flame-retardant material and measures 6.3 cm x 8.4 cm x 14.5 cm.

Verify voltage probe length and load type

Confirm your supply is 110V AC at 50 or 60 Hz before installation. The included NTC 10K sensor probe is 1.7 m or 5.6 ft long; ensure this reach suits the measurement point. The relay output handles resistive loads up to the rated 16A; inductive loads such as large compressor motors may require an external contactor not supplied.

Continuous operation at rated current

At the maximum 16A output the internal copper contacts and flame-retardant housing are rated for sustained temperatures up to 120 °C. The controller cycles the connected heater or cooler to maintain the set point within ±1 °C accuracy. Calibration offset of -9.9 to 9.9 and memory retention keep settings stable during long-running duty cycles.

Highlights

  • Clear 2.24-inch LCD shows status in darkness
  • Wide -40°C to 120°C range with ±1% accuracy
  • 16A 3680W output handles heating and cooling loads
  • 7 m NTC probe plus timing calibration and memory functions
  • Plug-play copper contacts in flame-retardant PC housing

Specifications

Type1
BrandHUAREW
ModelHWX-Backlight Controller
Size/Dimensions6.3 cm x 8.4 cm x 14.5 cm
ColorWhite
Mount Type1
Operating Temperature Range120 degrees_celsius
Item Count12 pack
Selling Unit1
Features1
Part NumberHWX-Backlight Controller

Questions about this item

Does the 12 pack include the NTC 10K temperature sensor probes, or must they be purchased separately?

Each of the 12 controllers comes with its own 1.7 m / 5.6 ft NTC 10K probe, so no separate sensor purchase is needed.

When would I choose the heating mode versus the cooling mode on this controller?

If the start temperature is set lower than the stop temperature the controller runs heating; if the start temperature is higher than the stop temperature it runs cooling.

What does the 16 A / 3680 W output rating mean for the heater or cooler I plug into the socket?

The connected heating or cooling device must not draw more than 16 A or 3680 W, otherwise the controller’s relay could be overloaded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.