HQRP
HQRP 10-Pack 6 Pin to 8 Pin (6+2) GPU PCIe Power Cable 20-inch
Ten cables convert a 6-pin PSU connector to an 8-pin GPU plug for mining rigs or graphics cards
- 10 cables connect 6-pin PSU to 8-pin GPU
- 18AWG wire handles mining and GPU loads
- 20-inch length fits standard chassis layouts
- Compatible with listed server PSU breakout boards
- Works with Radeon and other 6 or 8-pin cards
10-Pack 6 Pin to 8 Pin GPU Power Cable
This 10-pack supplies 20-inch cables that convert a standard 6-pin PCIe connector from a power supply or breakout board into an 8-pin (6+2) connector for graphics cards or mining hardware. Each cable uses 18AWG conductors and features male connectors on both ends. The pack is aimed at builders assembling multi-GPU mining rigs or upgrading several cards at once.
Capacity and headroom for multi-card rigs
Ten cables provide enough connections for large mining configurations or workstation builds with multiple high-power GPUs. The 20-inch length reaches from a server PSU breakout board to cards spaced across a standard mining frame. The 18AWG gauge handles the current draw of typical mining cards, but the cables do not add extra power phases beyond what the 6-pin source delivers.
Replaces single adapters and short extensions
This bundle replaces individual 6-pin to 8-pin adapters that are sold one at a time, reducing cable clutter and cost per connection. The jump is worth it when you need ten matching cables for a uniform build or when you are populating a breakout board such as the DPS-1200FB, HSTNS-PL11 or similar server PSU modules. Builders who need only one or two cables, or who require a different connector orientation, will not benefit from the pack size.
Highlights
- 10 cables connect 6-pin PSU to 8-pin GPU
- 18AWG wire handles mining and GPU loads
- 20-inch length fits standard chassis layouts
- Compatible with listed server PSU breakout boards
- Works with Radeon and other 6 or 8-pin cards
Specifications
No published specifications for this item yet.
Questions about this item
Will the 20-inch 18AWG cables reach my GPU when using a server PSU breakout board in a mining frame?
At 20 inches the 18AWG wires span the gap between a breakout board and most graphics cards in an open mining frame.
How can I confirm the 6-pin-to-8(6+2)-pin adapters are delivering stable power to each card?
The GPU should initialise without throttling and mining software should report steady hash rates on every connected card.
What does the 10-pack contain and what extra parts are required?
Ten 6-pin-to-8(6+2)-pin cables are included; a compatible PSU or breakout board must be supplied separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
