We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP module with a single RJ-45 port

HPE

HPE SFP transceiver RJ-45 1000Base-T 0.10 km

SKU CH-69HB-0BPYB

An SFP transceiver with an RJ-45 port for 1000Base-T links up to 0.10 km

  • Compatible BrandHPE
  • Connect servers over copper with 1000Base-T RJ-45 link
  • Extend Gigabit Ethernet up to 0.10 km on twisted pair
  • Hot-plug SFP form factor keeps network running during swaps
  • HPE-qualified module ensures compatibility with HPE switches
  • Single-port design adds one Gigabit link without extra cabling

HPE SFP RJ-45 1000Base-T Module

This HPE SFP (mini-GBIC) transceiver provides a single RJ-45 port for Gigabit Ethernet over twisted-pair copper. It is designed for data networking and optical network equipment that accept SFP modules. The unit suits administrators extending copper links between switches, routers or servers within the 100 metre reach. It is not for links requiring longer fibre distances or higher-speed Ethernet standards.

Thermals Noise and Power

The module operates within standard SFP power limits and produces no audible noise because it has no moving parts. Heat output is low enough for dense chassis installations with normal airflow. Typical power draw stays well inside the SFP MSA budget so existing power supplies handle multiple units without extra capacity planning. No special cooling or acoustic treatment is required.

1000Base-T 100 Metre Reach

The decisive specification is the 1000Base-T interface with a maximum distance of 0.10 km over Category 5e or better twisted-pair cable. This fixes the link speed at one gigabit per second and the reach at one hundred metres. Buyers needing 10 GbE copper, longer copper runs or fibre connectivity must select a different transceiver type.

Highlights

  • Connect servers over copper with 1000Base-T RJ-45 link
  • Extend Gigabit Ethernet up to 0.10 km on twisted pair
  • Hot-plug SFP form factor keeps network running during swaps
  • HPE-qualified module ensures compatibility with HPE switches
  • Single-port design adds one Gigabit link without extra cabling

Specifications

BrandHPE
Compatible BrandHPE

Questions about this item

How do I insert the HPE SFP module into my switch without damaging the latch?

Slide the transceiver straight into the SFP port until the latch clicks; forcing it at an angle bends the connector pins and is the most common mistake.

What part will need replacement first when the link runs continuously at 1000 Mbps?

The RJ-45 jack and internal PHY are rated for the full 1000Base-T spec; no user-serviceable component is expected to wear out before the switch itself.

At what cable length does signal loss become the limiting factor on this 1000Base-T module?

The guaranteed maximum distance is .10 km, so runs beyond 100 metres will show errors before any other limit appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.