We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower server chassis in silver grey finish

HPE

HPE ProLiant ML30 Gen10 Tower Server Xeon E-2124 3.3GHz 64GB DDR4 8TB SATA RAID

SKU CH-Q4K5-VHFQ1

Tower server with Xeon E-2124 at 3.3 GHz, 64 GB DDR4, 8 TB SATA RAID and iLO 5 remote management

  • Chassis TypeTower
  • Quad-core Xeon E-2124 at 3.3 GHz turbo to 4.3 GHz for responsive compute
  • 64 GB DDR4 2666 MHz memory supports multitasking and virtualisation workloads
  • 8 TB RAID storage across four 2 TB 7.2 K SATA drives protects data
  • Dual-port 1 Gb Ethernet provides redundant network connectivity
  • iLO 5 remote management enables headless administration

Ready-to-configure tower server

The HPE ProLiant ML30 Gen10 arrives as a tower chassis with an Intel Xeon E-2124 quad-core processor running at 3.3GHz with turbo up to 4.3GHz. It includes 64GB of DDR4 memory supplied as separate modules and 8TB of storage across four 3.5-inch SATA drives configured for RAID. The embedded 332i dual-port 1Gb Ethernet adapter and iLO 5 remote management are built in. This server suits small businesses and remote offices that want to assemble the final specification themselves.

Replaces basic file servers or aging workstations

Moving from a single-drive desktop or an older tower without hardware RAID gives you redundant storage via the Smart Array S100i controller and remote console access through iLO 5. The jump is worth it when you need ECC-capable DDR4 memory, dual network ports and a DVD-ROM drive in a chassis designed for 24/7 operation. Buyers who want hot-swap bays or redundant power supplies should look elsewhere.

Assembly required for memory and drives

The 64GB DDR4 kit (16GB modules) and the four 2TB SATA drives ship uninstalled, so you must populate the DIMM slots and drive bays before first boot. A single cabled power supply means no redundant power path, and the S100i RAID controller supports only entry-level RAID levels. The tower form factor fits standard racks with optional rails, but rack hardware is not included.

Highlights

  • Quad-core Xeon E-2124 at 3.3 GHz turbo to 4.3 GHz for responsive compute
  • 64 GB DDR4 2666 MHz memory supports multitasking and virtualisation workloads
  • 8 TB RAID storage across four 2 TB 7.2 K SATA drives protects data
  • Dual-port 1 Gb Ethernet provides redundant network connectivity
  • iLO 5 remote management enables headless administration

Specifications

Chassis TypeTower

Questions about this item

What tower space and 3.5-inch drive bays does the ML30 Gen10 need for four 2TB SATA drives?

The tower chassis accepts four 3.5-inch SATA drives; each 2TB 7.2K drive fits a standard bay and the Smart Array S100i Gen10 manages the RAID set.

How do I install the 64GB DDR4 memory and what step is often missed?

Insert the four 16GB PC4-21300 2666MHz unbuffered DIMMs into the motherboard slots; the step often missed is seating each module until the retention clips click on both sides.

When should the 2TB 7.2K SATA drives or the DVD-ROM be replaced?

Replace a 2TB drive if SMART alerts or RAID degradation appear via iLO 5; swap the DVD-ROM only if it fails to read media.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.