HPE
HPE ProCurve Switch 8200zl Management Module J9092A
Management module for the ProCurve Switch 8212zl chassis with one RJ-45 serial console port for out-of-band access, enabling redundant deployment or onsite sparing
- Out-of-band console access via single RJ-45 port
- Enables redundant management for 8212zl chassis
- Compact 1.4in height fits dense rack layouts
- Lightweight 1.19lb module simplifies onsite sparing
- Direct compatibility with ProCurve Switch 8212zl systems
ProCurve 8200zl Management Module J9092A
The HPE ProCurve Switch 8200zl Management Module J9092A is a dedicated control processor for the ProCurve Switch 8212zl chassis. It provides the core switching intelligence and a single RJ-45 serial console port for out-of-band management access. This module is required to operate the chassis or to add a second unit for high availability.
Redundancy upgrade or spare for 8212zl chassis
Network administrators running a ProCurve Switch 8212zl base system J8715A use this module to add a redundant management module for failover protection. It also serves as a critical onsite spare to minimise downtime if the primary module fails. Buyers who do not operate an 8212zl chassis have no use for this component.
Single RJ-45 console port for out-of-band access
The module features exactly one RJ-45 connector designated for serial console management. This physical interface is the only direct management link on the module itself. Administrators requiring a different console interface or additional management ports on the module cannot use this part.
Highlights
- Out-of-band console access via single RJ-45 port
- Enables redundant management for 8212zl chassis
- Compact 1.4in height fits dense rack layouts
- Lightweight 1.19lb module simplifies onsite sparing
- Direct compatibility with ProCurve Switch 8212zl systems
Specifications
| Brand | HPE |
|---|---|
| Model | J9092A |
Questions about this item
What console interface does the J9092A management module provide and what speed does it run at?
The module has one RJ-45 serial console port for out-of-band management; the serial link speed is configured in the switch software and is not fixed by the module itself.
What chassis slot dimensions and weight should I allow for the J9092A module?
The module measures 1.4 in high, 8.1 in wide, 10.1 in deep and weighs approximately 1.19 lb, fitting a standard 8200zl management slot.
How do I install a second J9092A module for redundancy in an 8212zl chassis and what step is often missed?
Power off the chassis, slide the module into the second management slot until the ejector levers latch, then power on and run the redundancy sync command so the standby module copies the active configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
IBM
IBM 00JX058 Xeon E5-2640 v3 8-core 2.60 GHz 20 MB L3 90 W switch module
$217.99
0.00253018BTC
In stock
