HPE
HPE ProCurve J9309A 4-Port Interface Module
Adds four XFP expansion slots at 10 Gbps to compatible ProCurve 5400zl and 8200zl switches
- Electrical Outlet Plug TypeInterface Module
- Four XFP slots expand uplink capacity for 8200zl and 5400zl switches
- Supports 10 Gbps data rate on each port for high-speed links
- Hot-swap module design allows installation without powering down the chassis
- ProCurve branding ensures consistent management across HPE switch series
- Purpose-built for data networking workloads in enterprise environments
HPE ProCurve J9309A 4-Port Interface Module
The HPE ProCurve J9309A is a 4-port interface module built for data networking. It installs into compatible ProCurve chassis to add four XFP expansion slots. The module supports a maximum data transfer rate of 10. It is designed for network administrators expanding port density on supported switches.
Suitable for 8200zl and 5400zl switch owners
This module fits HP ProCurve 8200zl and 5400zl switch series chassis. It serves teams needing four additional XFP slots for fibre uplinks or interconnects. Buyers using other switch families or requiring different slot types should look elsewhere. It does not function as a standalone network device.
Four XFP slots with 10 Gbps headroom
Each of the four expansion slots accepts XFP transceivers running up to 10. The module comfortably handles aggregation links and core uplifts within that bandwidth. Environments demanding higher per-port speeds or greater slot counts will exceed its capacity.
Highlights
- Four XFP slots expand uplink capacity for 8200zl and 5400zl switches
- Supports 10 Gbps data rate on each port for high-speed links
- Hot-swap module design allows installation without powering down the chassis
- ProCurve branding ensures consistent management across HPE switch series
- Purpose-built for data networking workloads in enterprise environments
Specifications
| Brand | HPE |
|---|---|
| Electrical Outlet Plug Type | Interface Module |
Questions about this item
Which HPE ProCurve switch chassis must I already own to install the J9309A module?
The J9309A is compatible only with the HP ProCurve 8200zl and 5400zl switch series, so you need one of those chassis.
Can I keep my existing XFP transceivers when adding this 4-port module?
Yes, the module provides four XFP expansion slots that accept standard XFP transceivers you may already have.
How do I verify the module is passing traffic at the rated 10 Gbps rate after installation?
Check the switch port statistics for each of the four XFP ports; they should show link up at 10 Gbps with incrementing packet counters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
IBM
IBM 00JX058 Xeon E5-2640 v3 8-core 2.60 GHz 20 MB L3 90 W switch module
$217.99
0.00251569BTC
In stock
