We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE 1.92 TB SATA 2.5 inch internal SSD with drive carrier

HPE

HPE P05314-001 1.92 TB SATA 2.5" internal hard drive

SKU CH-3KRD-DRNFJ

A 1.92 TB SATA solid-state drive in a 2.5-inch form factor with a carrier, built for read-intensive server workloads

  • 92 TB capacity stores large datasets
  • Read-intensive endurance suits server workloads
  • 5-inch SFF fits dense ProLiant bays
  • SATA interface integrates with existing HPE arrays
  • Included carrier simplifies hot-swap installation

HPE 1.92 TB SATA SSD for server blades

This HPE solid-state drive delivers 1.92 TB of storage in a 2.5-inch form factor with a SATA interface. It is built for read-intensive workloads in compatible HPE ProLiant and SimpliVity servers. The drive includes a carrier for direct installation into supported drive bays. It carries RoHS environmental certification.

SATA interface limits throughput to 6 Gb/s

The SATA connection caps maximum sequential transfer rates at the interface ceiling of 6 Gb/s. This ceiling applies regardless of the drive's internal capability. Servers requiring higher bandwidth need a different interface technology not provided by this model. The drive does not support wireless communication.

Read-intensive endurance rating defines suitability

The endurance type is rated as read intensive, meaning the drive is optimised for workloads with a high ratio of reads to writes. Write-heavy applications such as logging, caching or database journaling will exceed the design target. Buyers needing higher write endurance should select a drive with a different endurance rating.

Highlights

  • 92 TB capacity stores large datasets
  • Read-intensive endurance suits server workloads
  • 5-inch SFF fits dense ProLiant bays
  • SATA interface integrates with existing HPE arrays
  • Included carrier simplifies hot-swap installation

Specifications

BrandHPE

Questions about this item

Should I choose the 1.92 TB SATA model or a different capacity?

This part number is only offered in 1.92 TB. Other capacities would carry a different HPE part number and may not share the same read-intensive firmware or carrier.

What does the 1.92 TB capacity mean once the drive is installed in a server?

The operating system will see roughly 1.92 TB of usable space. The drive is tuned for read-intensive workloads such as boot, logging or content delivery rather than heavy write cycles.

The drive uses a SATA interface — what does that cap in practice?

SATA caps the maximum throughput at 6 Gbit/s, so sequential reads top out around 500 MB/s regardless of the NAND speed. It also means the drive fits standard 2.5" SATA bays in the listed ProLiant and SimpliVity servers.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.