We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular external PoE injector with label and ports

HPE Networking Instant On

HPE Networking Instant On R7T40A 60 W PoE Injector

SKU CH-R92S-YBXAZ MPN R7T40A

Delivers 60 W of PoE power with surge protection for compatible Aruba 580 Series outdoor access points

  • Delivers up to 60 W of power to compatible devices
  • Built-in surge protection safeguards connected equipment
  • External form factor enables flexible placement
  • Designed for Aruba 580 Series outdoor access points
  • Manufactured by Aruba Networks, Inc.

60 W PoE injector for outdoor access points

The HPE Networking Instant On R7T40A delivers up to 60 W of Power over Ethernet to compatible outdoor access points. It is designed for deployments where AC power is unavailable at the mounting location. The unit provides surge protection to shield connected equipment from transient voltage events. This external injector simplifies installation by combining data and power over a single cable run.

External form factor with surge protection

The injector uses an external form factor that can be placed conveniently along the cable path between the switch and the access point. Built-in surge protection helps prevent damage from electrical spikes on the Ethernet line. Power draw scales with the attached device up to the 60 W maximum output rating. No active cooling fans are present, so operation remains silent in normal use.

Bundled compatibility with Aruba 580 Series

The accessory is validated specifically for Aruba 580 Series Outdoor Access Points, ensuring correct power negotiation and startup behaviour. Using the injector with other devices is not guaranteed and may not deliver the required power class. The package includes the injector unit itself; mounting hardware and Ethernet cables are not supplied. Configuration is handled entirely on the access point side with no separate software required.

Highlights

  • Delivers up to 60 W of power to compatible devices
  • Built-in surge protection safeguards connected equipment
  • External form factor enables flexible placement
  • Designed for Aruba 580 Series outdoor access points
  • Manufactured by Aruba Networks, Inc.

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 60 W injector to an Aruba 580 Series Outdoor Access Point?

Connect the injector between your network switch and the access point using Ethernet cable; the injector adds power on the same cable so the AP receives both data and 60 W without a separate power supply.

What part will need replacement first on the R7T40A?

The internal surge-protection circuitry absorbs transients and degrades over time; after repeated strikes it should be swapped to keep the 580 Series AP protected.

What limits continuous output when the injector runs at full 60 W?

The 60 W maximum output rating is the hard ceiling; sustained loads at that level will not exceed it, so the injector itself is the first limit reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.