We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with gold PCI Express edge connector and single RJ45 port on metal bracket

HPE

HPE NC110TProduct PCI Express Gigabit Server Adapter

SKU CH-GVV6-ZQNHT MPN NC110TProduct

A single-port Gigabit Ethernet server adapter with PCI Express x1 interface, 48KB onboard memory, and brackets for half-height and full-height slots

  • Single-port Gigabit Ethernet for server connectivity
  • PCI Express x1 host interface for broad compatibility
  • 48 KB onboard memory buffers traffic efficiently
  • Auto-negotiated 10/100/1000Base-T copper link
  • Low-profile and full-height brackets included

Single-port Gigabit server adapter

The HPE NC110T is a PCI Express x1 Gigabit Ethernet card designed for ProLiant servers. It provides a single copper RJ-45 port with 10/100/1000Base-T auto-negotiation. The adapter includes both low-profile and full-height brackets for flexible installation. It targets administrators adding wired connectivity to compatible server platforms.

Sustained throughput with offload support

Onboard 48KB memory handles Large Send Offload and TCP Checksum Offload to reduce CPU utilisation during continuous traffic. Jumbo Frames up to 9K are supported for efficient large-payload transfers. Cold boot Wake-on-LAN and PXE enable remote management and network boot without local storage. The x1 host interface delivers consistent line-rate performance for single-port workloads.

PCI Express x1 host interface decides fit

The card requires an available PCI Express x1 slot and fits 2.7 by 5.1 inch dimensions with supplied brackets. Buyers needing multi-port density or fibre connectivity must select a different adapter. Compatibility depends on the server accepting standard plug-in form factor cards. Manufacturer part number 434905-B21 confirms the exact model for procurement.

Highlights

  • Single-port Gigabit Ethernet for server connectivity
  • PCI Express x1 host interface for broad compatibility
  • 48 KB onboard memory buffers traffic efficiently
  • Auto-negotiated 10/100/1000Base-T copper link
  • Low-profile and full-height brackets included

Specifications

BrandHPE

Questions about this item

How much power does the single-port NC110T draw when the link runs at 1000 Mbps all day?

The adapter uses a PCI Express x1 host interface with 48KB onboard memory and supports 10/100/1000Base-T auto-negotiation, so power draw stays low enough for continuous server operation without extra cooling.

What slot and bracket does my server need to accept the NC110T?

It requires a single-lane PCI Express x1 slot and ships with both low-profile (half-height) and full-height brackets to fit either ProLiant form factor.

Will the NC110T work in an older ProLiant that only has PCI-X slots?

No, the card uses a PCI Express x1 host interface and will not fit a PCI-X slot; it needs a server with at least one free PCIe x1 or larger slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.