We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twinaxial network cable with RJ45 connectors, 3.28 ft

HPE Juniper Networking

HPE Juniper Networking SRX-SFP-10GE-DAC-1MProduct 10GE RJ45 Twinaxial Cable 3.28 ft

SKU CH-KS97-MNBB6 MPN SRX-SFP-10GE-DAC-1MProduct

A 3.28 ft twinaxial cable with RJ45 connectors on both ends for 10GE network links

  • TypeTwinaxial
  • CatTwinaxial
  • Connector ARJ45
  • Connector BRJ45
  • 10 GbE performance with twinaxial construction
  • RJ45 connectors on both ends for direct attachment
  • 28 ft length suits rack-to-rack links
  • Cat twinaxial rating ensures signal integrity
  • New condition ready for immediate deployment

HPE Juniper 10GE Twinaxial Cable 3.28 ft

This new HPE Juniper Networking cable is a 10 Gigabit Ethernet direct-attach twinaxial assembly. It terminates in RJ45 male connectors on both ends and spans 3.28 ft. The part suits data-centre and campus links between switches, routers or servers that present 10GE RJ45 ports.

Suits 10GE RJ45 links only

Network engineers who need a short, low-latency copper link between two 10GE RJ45 interfaces will find this cable fits. It does not serve links that require SFP+ cages, fibre connectors or longer reach than 3.28 ft. Buyers needing different connector types or extended distance should look at other media.

Fixed 3.28 ft length decides fit

The single specification that determines compatibility is the 3.28 ft cable length. Rack layouts with wider spacing between 10GE RJ45 ports cannot use this assembly. Verify the exact end-to-end distance before ordering.

Highlights

  • 10 GbE performance with twinaxial construction
  • RJ45 connectors on both ends for direct attachment
  • 28 ft length suits rack-to-rack links
  • Cat twinaxial rating ensures signal integrity
  • New condition ready for immediate deployment

Specifications

BrandJuniper
TypeTwinaxial
CatTwinaxial
Connector ARJ45
Connector BRJ45

Questions about this item

How do I insert the RJ-45 connectors on this 3.28 ft twinaxial cable and what step causes link errors?

Align each RJ-45 male plug with the SFP+ port, push straight in until the latch clicks, then verify the link LED. The common error is stopping before the latch fully engages, which leaves the 10 GbE link unstable.

What maintenance or replacement will this twinaxial cable need over time?

Inspect the RJ-45 latch tabs and gold contacts every six months; replace the cable if a tab snaps or contacts show corrosion, as the twinaxial construction has no serviceable parts.

What limit appears first when this 3.28 ft cable runs sustained 10 GbE traffic?

The 3.28 ft length is the primary constraint; beyond this distance signal attenuation rises, so the cable itself becomes the limiting factor before connector wear or heat.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.