We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twinaxial cable with QSFP+ connectors on both ends, 9.84 ft long

HPE Juniper Networking

HPE Juniper Networking QFX-QSFP-DAC-3MProduct 9.84 ft QSFP+ to QSFP+ network ethernet cable

SKU CH-Y9N3-TNDXY MPN QFX-QSFP-DAC-3MProduct

A 9.84 ft twinaxial cable with QSFP+ connectors for Juniper QFX3500 and QFX3008-I devices

  • TypeTwinaxial
  • CatTwinaxial
  • Connector AQSFP+
  • Connector BQSFP+
  • 84 ft reach connects rack-top switches directly
  • QSFP+ ends plug straight into QFX3500 or QFX3008-I ports
  • Twinaxial copper design keeps latency low for short links
  • RoHS certified materials meet environmental standards
  • New cable ready for immediate deployment in Juniper networks

9.84 ft QSFP+ Twinaxial Cable

This 9.84 ft twinaxial cable carries a QSFP+ connector on each end for direct-attach links between compatible switches. It is built for short-range, high-density networking in data-centre racks. The RoHS-compliant assembly is manufactured by Juniper Networks.

Suits QFX3500 and QFX3008-I interconnects

Network teams connecting a QFX3500 switch or a QFX3008-I interconnect device will find this cable validated for those platforms. Builds that require longer reach, fibre media or a different vendor’s port spacing should select an alternative cable.

9.84 ft length decides fit

The fixed 9.84 ft length determines whether the cable spans the intended rack gap without slack or strain. Measure the exact port-to-port distance before ordering to confirm this specific reach meets the installation.

Highlights

  • 84 ft reach connects rack-top switches directly
  • QSFP+ ends plug straight into QFX3500 or QFX3008-I ports
  • Twinaxial copper design keeps latency low for short links
  • RoHS certified materials meet environmental standards
  • New cable ready for immediate deployment in Juniper networks

Specifications

BrandJuniper
TypeTwinaxial
CatTwinaxial
Connector AQSFP+
Connector BQSFP+

Questions about this item

Should I choose the 9.84 ft length or a different cable length for my rack?

The 9.84 ft twinaxial cable suits short rack-to-rack or intra-rack links; select a longer or shorter twinaxial assembly only if the physical distance between your QSFP+ ports demands it.

What throughput will this twinaxial cable actually deliver in a Juniper QFX3500 or QFX3008-I switch?

The passive twinaxial assembly carries the full lane rate negotiated by the QSFP+ ports on the QFX3500 or QFX3008-I, so throughput matches the switch port speed configured in the device.

Does the QSFP+ to QSFP+ interface limit the cable to a specific Ethernet or InfiniBand standard?

The QSFP+ connectors are protocol-agnostic; they transport whatever signalling the connected Juniper QFX3500 or QFX3008-I ports negotiate, whether Ethernet or another supported protocol.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.