We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular wireless access point with internal antennas

HPE Juniper Networking

HPE Juniper Networking AP43-US 2.4GHz 802.11a access point

SKU CH-10PD-81FBF MPN AP43-US

Wireless access point operating at 2.4 GHz with 802.11a support for Juniper AP43 series networks

  • Enterprise-grade wireless access point from Juniper Networks
  • Supports 802.11a standard on 2.4 GHz frequency band
  • AP43 model designed for indoor wireless deployments
  • Compatible with Juniper AP43 Access Point series
  • New condition ensures full manufacturer specifications

Internal Antenna Wireless AP

This Juniper access point uses an internal antenna to deliver wireless coverage. It operates on the 2.4 GHz band and supports the 802.11a standard. The unit is built for integration with the AP43 series infrastructure.

Compatibility Limited to AP43 Series

The device connects only with Juniper AP43 Access Point Series hardware. Buyers running other controller platforms or standalone architectures should look elsewhere. It does not function as a universal access point for mixed-vendor environments.

802.11a Standard on 2.4 GHz Band

The radio implements the 802.11a protocol at 2.4 GHz, a combination that differs from typical deployments. Verify that your network design specifically requires this PHY and frequency pairing before purchase.

Highlights

  • Enterprise-grade wireless access point from Juniper Networks
  • Supports 802.11a standard on 2.4 GHz frequency band
  • AP43 model designed for indoor wireless deployments
  • Compatible with Juniper AP43 Access Point series
  • New condition ensures full manufacturer specifications

Specifications

BrandJuniper

Questions about this item

Does the AP43-US require a PoE switch or separate power injector to operate?

The AP43-US is a wireless access point that typically requires Power over Ethernet from a compatible switch or injector for operation.

Can the AP43-US serve legacy 802.11a clients on the 2.4GHz band alongside newer devices?

The AP43-US supports the 802.11a standard on its 2.4GHz radio, allowing it to serve legacy clients using that protocol.

How do I confirm the AP43-US has joined the Juniper AP43 series controller after installation?

Verify the access point appears as a connected device in the Juniper AP43 series controller management interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.