HPE
HPE J9829A 5400R 1100W PoE+ zl2 server power supply
Standard PoE+ power module for 5400R zl2 switches, delivering 1100 W from 120 V AC or 230 V DC
- TypePower Module
- Delivers 1100 W for PoE+ switch operation
- Accepts 120 V AC or 230 V DC input
- Compact 5.1" × 7.5" × 6.3" form factor
- Weighs only 6.03 lb for easy installation
- REACH certified for environmental compliance
Purpose-built PoE+ module
The HPE J9829A is a 1100 W PoE+ zl2 power supply designed for the 5400R zl2 switch series. It accepts 120 V AC or 230 V DC input and delivers up to 1,100 watts to the chassis. The unit measures 5.1 in high, 7.5 in wide and 6.3 in deep, weighing approximately 6.03 lb. It carries REACH environmental certification.
Compatibility and limits
This module suits network operators who need a standard PoE+ power source for a 5400R zl2 chassis. It will not fit other switch families or non-zl2 5400R configurations. Buyers who require redundant hot-swap frames, different wattage tiers, or DC-only input voltages should look at alternative power modules.
Deciding specification
The single figure that determines fit is the 1100 W PoE+ output rating combined with the zl2 form factor. Only 5400R zl2 switches that specify this exact power module can use it. Confirm the chassis part number before ordering.
Highlights
- Delivers 1100 W for PoE+ switch operation
- Accepts 120 V AC or 230 V DC input
- Compact 5.1" × 7.5" × 6.3" form factor
- Weighs only 6.03 lb for easy installation
- REACH certified for environmental compliance
Specifications
| Brand | HPE |
|---|---|
| Type | Power Module |
Questions about this item
Which HPE switch chassis is the J9829A 1100W PoE+ zl2 power supply designed for?
The J9829A is a standard PoE+ power module built for the 5400R zl2 switch series.
Will this 1100W unit share load with an older 5400R supply that has a lower wattage rating?
The 5400R zl2 chassis supports mixed power supplies; each module delivers up to its rated output and the system balances the load across all installed units.
What front-panel indicator confirms the J9829A is delivering 1100W to the 5400R zl2 after installation?
A steady green input-power LED and a steady green output-power LED on the module face show that the supply is receiving 120 V AC or 230 V DC and providing up to 1100 W to the chassis.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



