We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE FlexNetwork 5130 JH325A 24G PoE+ 4 SFP+ 1-slot HI network switch

SKU CH-67PX-F8MAA MPN JH325A

24 PoE+ RJ-45 ports, 4 SFP+ uplinks and an expansion slot deliver 740 W PoE power for access points and cameras

  • Primary Ports24 x RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Ty
  • PowerVoltage: 100-240V AC, rated (90-264V AC, max) -48 to -60V DC
  • 24 PoE+ ports power access points and cameras directly
  • 740 W PoE budget supports dense device deployments
  • Four 10 GbE SFP+ uplinks handle aggregation traffic
  • 650 W maximum draw keeps rack power predictable
  • Modular slot adds extra uplinks or copper ports later

HPE FlexNetwork 5130 24-port PoE+ switch

The HPE FlexNetwork 5130 JH325A is a managed network switch with 24 RJ-45 autosensing 10/100/1000 PoE+ ports and four SFP+ 10GbE ports. It includes one expansion module slot for optional uplink modules. The unit supports IEEE 802.3at PoE+ on all copper ports and MACsec on ports 1-8. It operates on 100-240V AC or -48 to -60V DC input depending on the installed power supply.

Suitable for PoE+ access deployments needing 10G

This switch suits networks that need 24 PoE+ ports with up to 740W total PoE budget and four built-in 10G SFP+ uplinks. The single module slot allows up to six SFP+ ports or two 1/10GBASE-T ports with an optional module. Organisations that require more than one expansion slot, higher port density, or non-PoE variants should consider other models.

740W PoE+ budget across 24 ports

The key specification is the 740W PoE+ power budget distributed across all 24 RJ-45 ports. This determines how many powered devices such as wireless access points, IP phones or cameras can run simultaneously at full Class 4 power. The switch draws a maximum of 650W system power and 67W idle, so the available PoE budget depends on the chosen power supply and total system load.

Highlights

  • 24 PoE+ ports power access points and cameras directly
  • 740 W PoE budget supports dense device deployments
  • Four 10 GbE SFP+ uplinks handle aggregation traffic
  • 650 W maximum draw keeps rack power predictable
  • Modular slot adds extra uplinks or copper ports later

Specifications

BrandHPE
ModelJH325A
Primary Ports24 x RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec
4 x SFP+ 10GbE ports
1 x port expansion module slot
PowerVoltage: 100-240V AC, rated (90-264V AC, max) -48 to -60V DC, rated) (depending on power supply chosen)
Maximum power rating: 650W
Idle power: 67W
PoE power: 740W PoE+
Shipping weight8.70 kg
Package size584 × 457 × 102 mm

Questions about this item

How can I confirm the JH325A is forwarding traffic on all 24 PoE+ ports after installation?

Connect devices to each RJ-45 port and verify link LEDs show activity; the switch supports IEEE 802.3at PoE+ on all 24 ports with a 740 W PoE budget.

What ships with the JH325A and which power supply must be purchased separately?

The switch includes the chassis with 24 RJ-45 PoE+ ports, 4 SFP+ ports and one expansion-module slot; a 100-240 V AC or -48 to -60 V DC power supply is sold separately.

Which JH325A configuration should I choose if I need up to six 10 GbE uplinks?

Select the base model and add an optional expansion module that provides two additional SFP+ ports, raising the total to six 10 GbE uplinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.