We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE Aruba J9281D 10G SFP+ DAC cable 3.28 ft with SFP+ connectors both ends

HPE Aruba Networking

HPE Aruba Networking J9281D 10G SFP+ DAC Cable 3.28 ft

SKU CH-4G90-KVKWC MPN J9281D

A 3.28 ft SFP+ direct-attach cable carrying 10 Gbit/s between Aruba 8320/8400 switches

  • 10 Gbit/s direct-attach speed for low-latency links
  • 28 ft length keeps rack cabling tidy
  • SFP+ connectors on both ends for simple plug-in
  • Passive copper design needs no external power
  • Validated with Aruba 8320 and 8400 switch series

10G SFP+ Direct Attach Cable

This 3.28 ft SFP+ to SFP+ direct attach cable provides a 10 Gbit/s link between compatible network devices. It is built for short reach connections inside a rack or between adjacent racks. The passive copper assembly requires no separate transceivers or fibre patch cords.

Suits Aruba 8320 and 8400 switches.

The cable is qualified for Aruba 8320 and 8400 switch series and other ports that accept SFP+ direct attach copper. It will not support links beyond its 3.28 ft length, so buyers needing longer distances must use optical transceivers and fibre. It also does not fit SFP28 or QSFP+ ports.

3.28 ft length decides deployment

The fixed 3.28 ft reach is the single specification that determines whether this cable fits the physical layout. Measure the exact port-to-port distance before ordering; any longer span requires a different cable or fibre solution.

Highlights

  • 10 Gbit/s direct-attach speed for low-latency links
  • 28 ft length keeps rack cabling tidy
  • SFP+ connectors on both ends for simple plug-in
  • Passive copper design needs no external power
  • Validated with Aruba 8320 and 8400 switch series

Specifications

BrandHPE - SWITCHING
Shipping weight0.23 kg
Package size305 × 305 × 51 mm

Questions about this item

Which switch ports must I already have free to plug in the J9281D?

You need two available SFP+ ports that accept 10 Gbit/s direct-attach cables, one on each end of the 3.28 ft link.

Will the cable work if I connect one end to an Aruba 8320 and the other to an older 10 Gbit/s SFP+ switch?

Yes, the J9281D is a passive SFP+ to SFP+ DAC rated for 10 Gbit/s, so any standards-compliant 10 Gbit/s SFP+ port on either side will establish the link.

How can I confirm the 3.28 ft cable is delivering 10 Gbit/s after I connect it?

Check the switch port status LEDs or run show interface on the Aruba 8320 or 8400; both ends should report 10 Gbit/s full-duplex with no errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.