HPE
HPE Aruba AP-305 (RW) JX936A access point
Dual-band 802.11ac access point with three internal antennas delivering 1.70 Gbit/s wireless speed
- FeaturesInternational Version JX936A AP-305 (RW)
- Dual-band 2.40 GHz and 5 GHz coverage
- 70 Gbit/s aggregate throughput for high-density areas
- Three internal antennas with MIMO for reliable signals
- IEEE 802.11ac Wave 2 performance in a compact AP
- International version JX936A ready for global deployment
HPE Aruba AP-305 access point
The HPE Aruba AP-305 (RW) is a dual-band wireless access point built for small to mid-size offices that need reliable IEEE 802.11ac coverage. It delivers up to 1.70 Gbit/s aggregate throughput using 2x2 and 3x3 MIMO across both 2.40 GHz and 5 GHz radios.
IEEE 802.11ac practical limits
The 802.11ac standard caps real-world throughput well below the 1.70 Gbit/s phy rate due to overhead, client capabilities and channel contention. Three internal antennas improve spatial diversity, but total capacity is shared among all associated devices on each band.
Pre-deployment checks
Verify that your network infrastructure can supply PoE power to the AP-305 and that your controller or management platform supports the JX936A model. Confirm regulatory domain compatibility for the intended country before installation.
Highlights
- Dual-band 2.40 GHz and 5 GHz coverage
- 70 Gbit/s aggregate throughput for high-density areas
- Three internal antennas with MIMO for reliable signals
- IEEE 802.11ac Wave 2 performance in a compact AP
- International version JX936A ready for global deployment
Specifications
| Brand | HPE |
|---|---|
| Model | AP-305 (RW) |
| Part Number | JX936A |
| Features | International Version JX936A AP-305 (RW) |
Questions about this item
Is the JX936A the only hardware version of the AP-305 or are there other part numbers?
The listing shows a single part number, JX936A, marked as an International Version with dual 2x2 and 3x3 radio chains.
What does the 1.70 Gbit/s wireless speed mean for actual throughput on my network?
That figure is the peak PHY rate under 802.11ac using both 2.40 GHz and 5 GHz bands; real-world throughput will be lower due to overhead, interference and client capabilities.
Which Wi-Fi standard does the AP-305 use and what does it cap in practice?
It uses IEEE 802.11ac with three internal antennas and MIMO, limiting peak link speed to 1.70 Gbit/s across the two frequency bands.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



