HPE
HPE AJ834A fibre optic cable LC to LC OM3 1.0m 2-fiber 1-pack
Connects LC devices with a 1.0 m OM3 multi-mode duplex fibre patch lead
- TypeFiber Optic
- Length3.28 ft
- Connector Number1
- Connector DetailConnector on First End:2 x LC Male Connector on Second End:2
- FeaturesPackaged Quantity:1
- OM3 multimode supports 10 GbE links
- 50/125 µm core suits laser-optimised transmission
- LC duplex connectors on both ends
- 0 metre length fits rack-to-rack runs
- Single-cable pack simplifies ordering
range OM3 duplex cable
This duplex LC-to-LC patch cord uses 50/125 µm OM3 fibre rated for 8 Gb Fibre Channel and 10 GbE links. The aqua jacket identifies the laser-enhanced multimode construction. It ships as a single one-metre assembly ready for rack or patch-panel use.
Suited for short-reach server and storage links
Ideal for connecting HPE switches, storage arrays or servers inside the same rack where 1.0 metre reach is sufficient. Not suited for runs that exceed this length, for single-mode infrastructure, or for installations that require MTP/MPO connectors.
OM3 50/125 µm multimode fibre core
The 50/125 µm OM3 core determines bandwidth and distance limits for 8 Gb FC and 10 GbE. Verify that both ends use LC ports and that the link budget matches this fibre specification before ordering.
Highlights
- OM3 multimode supports 10 GbE links
- 50/125 µm core suits laser-optimised transmission
- LC duplex connectors on both ends
- 0 metre length fits rack-to-rack runs
- Single-cable pack simplifies ordering
Specifications
| Brand | HP |
|---|---|
| Model | AJ834A |
| Type | Fiber Optic |
| Length | 3.28 ft |
| Connector Number | 1 |
| Connector Detail | Connector on First End:2 x LC Male Connector on Second End:2 x LC Male |
| Features | Packaged Quantity:1 |
| Shipping weight | 0.27 kg |
| Package size | 325 × 267 × 23 mm |
Questions about this item
What LC connector spacing does the 1.0 m OM3 cable require on the patch panel?
The cable terminates in two LC male connectors on each end, so the panel must accept standard duplex LC spacing for both the first and second ends.
Which polishing step is critical when seating the LC ferrules in a 50/125 µm OM3 link?
Ensure each LC ferrule is fully inserted until the latch clicks; an incomplete seat leaves an air gap that degrades the laser-enhanced 8 Gb FC and 10 GbE signal.
When should the 1.0 m duplex assembly be replaced in a 50/125 µm OM3 installation?
Replace the cable if insertion loss exceeds the OM3 budget, if the LC latch tabs are broken, or if the jacket shows kinks or crush marks from routing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115009BTC
In stock
