We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5-inch internal hard drive with attached carrier tray

HPE

HPE 819078-001 2TB 7.2k 3.5" SAS 12Gb/s

SKU CH-SMC6-WT0ZK

A 2 TB internal hard drive with a 3.5" form factor, 7200 rpm spindle speed and 12Gb/s SAS interface for compatible HPE servers

  • MaterialMetal
  • 2 TB capacity for large datasets
  • 7200 rpm spindle for consistent throughput
  • 12Gb/s SAS interface for fast transfers
  • 5 inch form factor with carrier for server bays
  • Compatible with DL360 and DL380 Gen10 servers

Enterprise 2 TB SAS Hard Drive

This HPE 819078-001 Midline drive provides 2 TB of storage on a 3.5 inch internal form factor. It spins at 7200 rpm and connects through a 12Gb/s SAS interface. The unit is built for server and storage-system deployments that require high-capacity bulk storage.

Included Drive Carrier

A drive carrier is supplied with the hard drive so it can be secured directly into compatible server bays. The carrier matches the large-form-factor slots found in the listed DL360 Gen10 and DL380 Gen10 configurations as well as the DL160 G10 and DL180 G10 platforms. No separate caddy or mounting hardware is required.

Hot-Plug Installation Steps

The drive slides into a hot-plug bay while the server remains powered on and the SAS backplane detects it automatically. Ensure the carrier latch clicks fully into place to avoid connection errors. Compatibility is limited to the specific HPE server models and StoreEasy arrays identified in the manufacturer documentation.

Highlights

  • 2 TB capacity for large datasets
  • 7200 rpm spindle for consistent throughput
  • 12Gb/s SAS interface for fast transfers
  • 5 inch form factor with carrier for server bays
  • Compatible with DL360 and DL380 Gen10 servers

Specifications

BrandHPE
MaterialMetal

Questions about this item

How often will the 7200 rpm spindle bearings need replacement?

The 7200 rpm spindle is sealed for the drive life and has no user-serviceable bearings.

Which limit appears first during sustained 12Gb/s SAS writes?

The 7200 rpm spindle speed caps sustained throughput before the 12Gb/s SAS link saturates.

How much heat does the 3.5" drive add to a server running all day?

The 3.5" form factor dissipates typical midline heat levels; server fans handle the load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.