HPE
HPE 777382-B21 SAS cable kit for DL60 Gen9 and DL120 Gen9 4LFF with P440
Connects a Smart Array P440 controller to four large-form-factor drive bays in DL60 or DL120 Gen9 servers
- TypeData Transfer Cable
- ColorBlack
- Connector Number1
- Connects P440 controller to 4LFF drive bays in DL60 Gen9
- Enables SAS data paths for DL120 Gen9 server storage
- Purpose-built cable kit for HPE Gen9 4LFF configurations
- Single SAS connector simplifies internal cabling layout
- Weighs approximately .99 lb for lightweight installation
Purpose-built SAS cable kit
This HPE 777382-B21 kit connects the Smart Array P440 controller to the four large-form-factor drive bays in DL60 Gen9 and DL120 Gen9 servers. It is designed for administrators who need to add or replace the factory cabling in these specific Generation 9 chassis.
Passive signal path
The cables carry SAS traffic without active components so they add no heat and draw no power. Normal operation is silent and does not change the thermal profile of the server.
Direct controller-to-backplane fit
Each assembly plugs straight into the P440 and the 4LFF backplane, using the routing channels already present in the DL60 and DL120 Gen9. No extra brackets or adapters are required, leaving all expansion slots free for other cards.
Highlights
- Connects P440 controller to 4LFF drive bays in DL60 Gen9
- Enables SAS data paths for DL120 Gen9 server storage
- Purpose-built cable kit for HPE Gen9 4LFF configurations
- Single SAS connector simplifies internal cabling layout
- Weighs approximately .99 lb for lightweight installation
Specifications
| Brand | HP |
|---|---|
| Type | Data Transfer Cable |
| Color | Black |
| Connector Number | 1 |
| Shipping weight | 0.07 kg |
| Package size | 284 × 235 × 10 mm |
Questions about this item
How do I install the SAS cable kit in a DL60 or DL120 Gen9 4LFF server with a P440 controller?
Route the cable from the Smart Array P440 controller to the 4LFF backplane, ensuring the SAS connector locks securely; the step often missed is fully seating the latch on both ends to avoid intermittent detection.
What maintenance or replacement will the SAS cable kit need over time?
Inspect the cable for kinks, connector wear, or latch fatigue during server upgrades; replace it if the SAS connector shows bent pins or the latch no longer clicks securely.
What limit appears first on the SAS cable kit under sustained heavy I/O workloads?
The single SAS link becomes the throughput bottleneck before the cable itself degrades, capping sustained transfer rates at the controller's lane speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114917BTC
In stock
