We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
One-metre MiniSAS HD to MiniSAS HD cable with identical connectors at both ends

HPE

HPE 716195-B21 1.0 m MiniSAS HD to MiniSAS HD infiniband cable

SKU CH-T9B4-ZQHF8 MPN 716195-B21

One-metre Mini SAS HD to Mini SAS HD extension cable for SAS data transfer

  • TypeData Transfer Cable
  • Length3.28 ft
  • FeaturesMinimum Dimensions (HxWxD) 30.18 x 40.64 x 8.59 cm Weight 0.
  • Connect storage enclosures directly with Mini-SAS HD ends on both sides
  • Extend SAS links one metre without signal degradation using 1.0 m cable
  • Fit tight rack spaces with compact 8.59 cm depth connector profile
  • Reduce cable weight to .45 kg for easier cable management
  • Identify the correct spare instantly with part number 716195-B21

1.0 m MiniSAS HD extension cable

This HPE 716195-B21 cable connects two MiniSAS HD ports over a one-metre run. It is built for server and storage enclosures that use SAS links between controllers, backplanes or expansion shelves. The 3.28 ft length suits rack-mounted gear where devices sit close together. The assembly weighs 0.45 kg and meets HPE factory specifications.

Suits direct MiniSAS HD links only

Installers who need a short, factory-tested extension between matching MiniSAS HD connectors will find this part fits without adapters. Builders requiring longer reach, different connector types or protocol conversion should look at other cable families because this unit is fixed at one metre and MiniSAS HD on both ends.

Cable length fixed at 1.0 m

The single specification that decides fit is the 1.0 m / 3.28 ft length between identical MiniSAS HD ends. If the chassis layout demands a longer or shorter run, or if either endpoint uses a different connector, this cable cannot be used.

Highlights

  • Connect storage enclosures directly with Mini-SAS HD ends on both sides
  • Extend SAS links one metre without signal degradation using 1.0 m cable
  • Fit tight rack spaces with compact 8.59 cm depth connector profile
  • Reduce cable weight to .45 kg for easier cable management
  • Identify the correct spare instantly with part number 716195-B21

Specifications

BrandHP
TypeData Transfer Cable
Length3.28 ft
FeaturesMinimum Dimensions (HxWxD) 30.18 x 40.64 x 8.59 cm
Weight 0.45 kg
Shipping weight0.68 kg
Package size457 × 330 × 102 mm

Questions about this item

What rack depth does the 1.0 m MiniSAS HD cable need for routing?

The cable needs at least 40.64 cm of width and 30.18 cm of height clearance in the rack, with a bend radius that fits the 8.59 cm depth dimension.

How do you seat the MiniSAS HD connectors without damaging the latch?

Align the keyed MiniSAS HD plug, push straight in until the latch clicks, then pull gently to confirm it is locked; forcing at an angle bends the latch.

When should the 1.0 m MiniSAS HD cable be replaced?

Replace the cable if the latch no longer holds, the jacket shows kinks or cuts, or intermittent link errors appear on the SAS connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.