We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SATA SSD in HPE G8 tray with label showing 1.92TB capacity

HPE

HPE 5100 ECO 1.92TB SATA 2.5" enterprise SSD

SKU CH-MXZ6-ZV58H

1.92 TB SATA enterprise SSD with TCG self-encryption, hot-plug support and fast secure erase for read-intensive server workloads

  • Form Factor2.5"
  • Capacity1.92TB
  • Memory Components3D TLC NAND
  • InterfaceSATA 6Gb/s
  • Max Sequential Read540 MB/s
  • Max Sequential Write520 MB/s
  • Enterprise-grade encryption protects data at rest
  • 92TB capacity stores large datasets
  • 540 MB/s sequential read speeds up workloads
  • Hot-plug support enables drive swaps without downtime
  • Fast secure erase simplifies end-of-life sanitisation

Purpose-built enterprise storage

The HPE 5100 ECO 1.92TB SATA 6Gb/s 2.5" SSD installs directly into HPE Gen8 to Gen10 ProLiant servers using the included G8 tray. It delivers sequential reads up to 540 MB/s and writes up to 520 MB/s over a SATA interface, with 3D TLC NAND and TCG Enterprise self-encryption for data at rest. Hot-plug support allows drive replacement without powering down the server.

Read-intensive workloads in supported ProLiant

This drive suits administrators running read-heavy applications such as web serving, content delivery or virtual desktop infrastructure on listed DL and ML series servers. It is not suited for write-intensive workloads that exceed read-optimised endurance, nor for servers outside the Gen8 to Gen10 2.5" SFF compatibility list. Systems requiring a different form factor or a non-SATA protocol cannot use this part.

SATA 6Gb/s interface determines compatibility

The single specification that decides fitment is the SATA 6Gb/s interface combined with the 2.5" form factor and HPE G8 tray. Only servers listed in the Gen8 to Gen10 2.5" SFF chassis matrix can accept this drive; any system lacking a SATA 6Gb/s backplane or the correct tray mechanics will be incompatible.

Highlights

  • Enterprise-grade encryption protects data at rest
  • 92TB capacity stores large datasets
  • 540 MB/s sequential read speeds up workloads
  • Hot-plug support enables drive swaps without downtime
  • Fast secure erase simplifies end-of-life sanitisation

Specifications

BrandHPE
Model5100 ECO
Part Number870667-004
Form Factor2.5"
Capacity1.92TB
Memory Components3D TLC NAND
InterfaceSATA 6Gb/s
Max Sequential Read540 MB/s
Max Sequential Write520 MB/s
FeaturesTCG Enterprise compliant self-encrypting drive, Hot-plug capable, Fast and secure erase

Questions about this item

Will this 2.5" SATA SSD fit the drive bays in my Gen8 ProLiant DL360p?

The drive ships in an HPE G8 tray that matches the 2.5" SFF chassis used by Gen8-to-Gen10 ProLiant DL and ML servers, so it slides directly into the DL360p bay.

How can I confirm the self-encryption is active after installation?

The drive is TCG Enterprise compliant; once the controller or BIOS reports the encryption status as enabled, the hardware AES engine is protecting data at rest.

Does the package include mounting screws or only the G8 tray?

The unit comes pre-mounted in the HPE G8 carrier; no separate screws or caddies are required for supported ProLiant SFF bays.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.