HP
HP ProLiant ML30 Gen10 Tower Server Intel Xeon E-2124 64GB DDR4 8TB RAID iLO 5 Windows Server 2019
A tower server with a 3.3 GHz Xeon E-2124, 64 GB DDR4, 8 TB SATA RAID storage, iLO 5 remote management and Windows Server 2019 pre-licensed
- Chassis TypeTower
- Quad-core Xeon E-2124 at 3.3 GHz with 4.3 GHz turbo
- 64 GB DDR4-2666 in two 32 GB modules
- 8 TB SATA RAID across four 3.5" 2 TB drives
- iLO 5 remote management for headless control
- Windows Server 2019 Standard pre-licensed for immediate deployment
Tower Server Bundle
The HP ProLiant ML30 Gen10 is a tower server configured with an Intel Xeon E-2124 quad-core processor running at 3.3 GHz with turbo up to 4.3 GHz. It ships with 64 GB of DDR4 memory and 8 TB of storage across four 3.5-inch SATA drives. Windows Server 2019 Standard is included for immediate deployment.
Build and Connectivity
The tower chassis uses a single cabled power supply and includes a DVD-ROM drive. Dual-port 1 Gb Ethernet is provided by the embedded 332i adapter for wired network connectivity. The Smart Array S100i Gen10 controller manages the included drives in a RAID configuration. Remote management is handled by iLO 5 Standard for out-of-band access.
Assembly and Software Impact
Memory modules and hard drives are supplied separately and require installation before the server can operate. This means the buyer must populate the DIMM slots and drive bays during initial setup. Once assembled, the pre-licensed Windows Server 2019 Standard environment is ready for role configuration without additional operating-system procurement.
Highlights
- Quad-core Xeon E-2124 at 3.3 GHz with 4.3 GHz turbo
- 64 GB DDR4-2666 in two 32 GB modules
- 8 TB SATA RAID across four 3.5" 2 TB drives
- iLO 5 remote management for headless control
- Windows Server 2019 Standard pre-licensed for immediate deployment
Specifications
| Chassis Type | Tower |
|---|
Questions about this item
What interface do the four 2TB drives use and what speed does it cap at?
The drives connect through 6Gb/s SATA, so each drive is limited to that bus speed in the RAID array.
What physical space is needed to install the four 3.5-inch drives?
The tower chassis provides four 3.5-inch drive bays for the 2TB SATA drives included in the bundle.
How are the 32GB DDR4 memory modules installed and what step is often missed?
Insert the two unbuffered DDR4 2666MHz modules into the motherboard DIMM slots and press firmly until the retention clips click, otherwise the server will not recognise the full 64GB.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



