We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver module with matte black housing and single LC duplex port

HP

HP ProCurve X132 10Gbps SFP+ Transceiver 850nm 300m J9150A

SKU CH-V4TN-F10YH

A 10 Gbps SFP+ transceiver that links multimode fibre up to 300 m at 850 nm

  • Device TypeSFP+
  • Wavelength850nm
  • Ports1 x LC 10GBase-SR Full-duplex
  • Max Distance300m
  • 10Gbps connectivity up to 300 metres on multimode fibre
  • SFP+ form factor fits standard 10GBase-SR ports
  • 850nm wavelength optimised for short-range links
  • Single LC duplex port for simple patching
  • HP ProCurve X132 module with part number J9150A

HP ProCurve X132 10Gbps SFP+ Transceiver

The HP ProCurve X132 is a 10Gbps SFP+ transceiver module designed for 10GBase-SR connections over multimode fibre. It operates at an 850nm wavelength and provides a single LC duplex port for high-speed network links. This module suits network administrators upgrading HP ProCurve switches or compatible equipment to 10-Gigabit backbone or server connections.

Check SFP+ slot compatibility

Verify that your switch or router accepts SFP+ form-factor modules and supports the 10GBase-SR standard at 850nm. Ensure your existing cabling is multimode fibre with LC connectors rated for the required distance. Confirm the host device firmware recognises HP ProCurve branded transceivers to avoid link negotiation issues.

Replaces older 1Gbps SFP modules for 10GBase-SR

This transceiver upgrades connections currently limited to 1Gbps SFP optics on multimode fibre runs up to 300m. The jump is worth it when aggregate throughput demands exceed gigabit capacity and the existing fibre plant supports 10GBase-SR specifications. It does not extend reach beyond the 300m limit or support single-mode fibre environments.

Highlights

  • 10Gbps connectivity up to 300 metres on multimode fibre
  • SFP+ form factor fits standard 10GBase-SR ports
  • 850nm wavelength optimised for short-range links
  • Single LC duplex port for simple patching
  • HP ProCurve X132 module with part number J9150A

Specifications

BrandHP
Device TypeSFP+
Wavelength850nm
Ports1 x LC 10GBase-SR Full-duplex
Max Distance300m

Questions about this item

What cables or patch cords must I purchase to use the J9150A transceiver?

The module has one LC duplex port for 10GBase-SR; you need OM3 or OM4 multimode patch cords with LC connectors on both ends.

When should I choose the J9150A over the J9150-69101 option part?

Both numbers refer to the same 10 Gbps 850 nm SFP+ module; use the retail part J9150A when ordering.

How far will a 10 Gbps link actually run with this 850 nm module in my switch?

Up to 300 metres on OM3 or OM4 multimode fibre; shorter reaches are possible on lower-grade cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.