HP
HP MicroServer Gen10 Plus Server Chassis Xeon E-2224 3.4GHz 64GB 8TB RAID
Compact tower server with Xeon E-2224 3.4GHz, 64GB DDR4, 8TB SATA RAID and Windows Server 2019 Standard
- Chassis TypeMini-Tower
- Quad-core Xeon E-2224 reaches 4.6GHz turbo for responsive business workloads
- 64GB DDR4 2666MHz memory handles multiple VMs and databases smoothly
- 8TB across four 7.2K SATA drives gives ample redundant storage
- Hardware RAID via Smart Array S100i protects data against drive failure
- Windows Server 2019 Standard pre-licensed for immediate deployment
Ready-to-deploy tower server
The HP MicroServer Gen10 Plus chassis arrives as a mini-tower configured with a Xeon E-2224 quad-core processor at 3.4GHz, 64GB of DDR4 PC4-21300 2666MHz memory and 8TB of storage across four 2TB 7.2K SATA 3.5-inch drives. Windows Server 2019 Standard is included for immediate small-business or remote-office deployment.
Quiet single-supply operation
A single power supply drives the system while the onboard quad-port 1GbE NIC handles network traffic without additional cards. The compact tower layout keeps acoustic output low in typical office environments and the Smart Array S100i SR Gen10 controller manages the RAID array with minimal overhead.
Assembly-required components
The 64GB memory kit and four 2TB hard drives ship separately and must be installed before first boot, so the buyer or integrator performs the final build step. This approach lets you verify each module and drive during installation but adds setup time compared with a fully assembled unit.
Highlights
- Quad-core Xeon E-2224 reaches 4.6GHz turbo for responsive business workloads
- 64GB DDR4 2666MHz memory handles multiple VMs and databases smoothly
- 8TB across four 7.2K SATA drives gives ample redundant storage
- Hardware RAID via Smart Array S100i protects data against drive failure
- Windows Server 2019 Standard pre-licensed for immediate deployment
Specifications
| Chassis Type | Mini-Tower |
|---|
Questions about this item
How do I install the 64GB DDR4 memory and four 3.5" SATA drives that ship outside the chassis?
Open the mini-tower, seat both 32GB DDR4 2666MHz modules in the DIMM slots, then mount the four 2TB 7.2K 3.5" drives in the drive bays and connect each to the onboard SATA ports and power cables.
Which components will need replacement first during long-term operation?
The four 7.2K 3.5" SATA hard drives and the single power supply are the field-replaceable parts most likely to require service over the server's lifespan.
What thermal limit appears first when the Xeon E-2224 runs at 4.6GHz turbo under sustained load?
The single power supply and chassis airflow become the limiting factor before the CPU hits its thermal ceiling during prolonged 4.6GHz turbo operation.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



