HP
HP LaserJet Pro M401dn Monochrome Laser Printer 35 PPM with CF278A Toner
Monochrome laser printer prints 35 pages per minute with automatic duplexing, USB 2.0 and Ethernet connectivity, 300-sheet input capacity, 1200 x 1200 dpi resolution.
- Product TypeOther Accessories
- Fast 35 PPM output keeps workflows moving
- Automatic duplexing cuts paper use in half
- Wired Ethernet plus USB 2.0 for simple network sharing
- 300-sheet tray reduces reload interruptions
- New CF278A toner included so you print immediately
Monochrome Laser Printer 35 PPM
The HP LaserJet Pro M401dn is a monochrome laser printer rated at 35 pages per minute. It connects via USB 2.0 and Ethernet for shared office use. Automatic duplex printing is built in. The 300-sheet input tray supports extended print runs without frequent reloading.
Thermals Noise Power
Laser printing produces minimal noise during normal operation compared with impact devices. The unit enters a low-power state when idle to reduce electricity consumption. No active cooling fan is audible under typical office workloads. The included CF278A toner cartridge is new and ready for immediate use.
Sustained Load Behaviour
At the rated 35 pages per minute the engine maintains consistent output for long documents. Duplex printing runs continuously without pausing for manual page turns. The 90-day depot warranty covers hardware defects during early deployment. Print resolution stays at 1200 by 1200 dpi throughout high-volume jobs.
Highlights
- Fast 35 PPM output keeps workflows moving
- Automatic duplexing cuts paper use in half
- Wired Ethernet plus USB 2.0 for simple network sharing
- 300-sheet tray reduces reload interruptions
- New CF278A toner included so you print immediately
Specifications
| Product Type | Other Accessories |
|---|
Questions about this item
How do I install the CF278A toner cartridge in the HP LaserJet Pro M401dn, and what step do people often miss?
Open the front cover, pull the old cartridge straight out, remove the orange sealing tape from the new CF278A cartridge, rock it gently to distribute toner, insert until it clicks, then close the cover.
What maintenance or replacement will the HP LaserJet Pro M401dn need after the included CF278A toner runs out?
You will need to replace the CF278A toner cartridge when print quality fades; the printer also has a separate imaging drum and fuser unit that require replacement after higher page counts.
What limit appears first during sustained printing on the HP LaserJet Pro M401dn?
The 300-sheet paper input tray will need refilling before the 35 PPM engine reaches any thermal or duty-cycle limit during continuous duplex printing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



