We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with LC port and silver metal housing

HP

HP J9151E Aruba 10 Gbps LC Single-mode 10 km SFP+ LR Transceiver

SKU CH-YKQH-Q9CPM

10 Gbps SFP+ LR transceiver reaches 10 km over 1310 nm single-mode LC fibre

  • Device TypeTransceiver
  • Form FactorSFP+
  • Wavelength1310nm
  • Transfer Rate10 Gbps
  • 10 Gbps throughput over single-mode fibre up to 10 km
  • LC duplex connector for standard patch-cord compatibility
  • 1310 nm wavelength optimised for long-reach links
  • SFP+ form factor fits compatible switch and router slots
  • Minimum 6 dB optical budget ensures reliable 10 km reach

HP J9151E Aruba SFP+ LR Transceiver

The HP J9151E Aruba transceiver provides 10 Gbps connectivity over single-mode fiber using an LC duplex connector. It operates at a 1310 nm wavelength and is designed for network links up to 10 km. This module suits enterprise and campus environments extending 10 Gigabit Ethernet between buildings or distribution frames.

Sustained 10 Gbps line-rate operation

The transceiver maintains the full 10 Gbps transfer rate continuously across the 10 km single-mode path. Its optical budget of 6 dB supports the rated distance without signal regeneration under normal attenuation. The 1310 nm laser delivers stable output for long-haul campus or metro links where consistent throughput matters more than short-burst capacity.

SFP+ LR reach and single-mode constraints

The SFP+ LR standard limits practical deployment to single-mode fiber with LC connectors at 1310 nm. Multimode cable or shorter-reach optics will not interoperate with this module. Links beyond 10 km exceed the guaranteed optical budget and require different transceivers or amplification not covered by this device.

Highlights

  • 10 Gbps throughput over single-mode fibre up to 10 km
  • LC duplex connector for standard patch-cord compatibility
  • 1310 nm wavelength optimised for long-reach links
  • SFP+ form factor fits compatible switch and router slots
  • Minimum 6 dB optical budget ensures reliable 10 km reach

Specifications

BrandHP
Part NumberJ9151E
Device TypeTransceiver
Form FactorSFP+
Wavelength1310nm
Transfer Rate10 Gbps

Questions about this item

How much power does the J9151E draw when it runs continuously in a switch?

The J9151E is a standard SFP+ LR module that operates within the SFP+ power envelope, drawing low power while maintaining a 10 Gbps link over 10 km single-mode fiber.

What cabling and patch panels must I already have to use this transceiver?

You need duplex LC single-mode fiber patch cables rated for 1310 nm and a 10 Gbps SFP+ port on your switch or router to accept the J9151E.

Will the J9151E link reliably with older 1 Gbps SFP ports I still use?

No, the J9151E is a 10 Gbps SFP+ LR transceiver and requires a 10 Gbps SFP+ port; it will not negotiate down to 1 Gbps on legacy SFP slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.