HP
HP 519T1AA HyperX Cloud Stinger 2 gaming headset
Lightweight wired headset with 50 mm drivers and DTS Headphone:X spatial audio for PC
- CompatibilityPC
- ColorBlack
- LED-
- Connection TypeWired
- Connector3.5mm
- Cord Length6.56ft, headset cable (2.0mm), 0.49ft PC PC splitter cable (
- DTS Headphone:X spatial audio with 2-year activation code for immersive 3D positioning
- 50 mm neodymium drivers covering 10 Hz to 28 kHz for wide frequency response
- Lightweight 0.60 lb over-ear design with memory foam cushions for long-session comfort
- Swivel-to-mute condenser microphone at -40.5 dBV sensitivity for clear voice capture
- Wired 3.5 mm connection with 6.56 ft cable and 0.49 ft PC splitter for simple setup
Lightweight 50mm wired headset for PC
The HyperX Cloud Stinger 2 weighs 0.60lb and uses 50mm dynamic drivers with neodymium magnets. It connects through a 3.5mm plug and includes a 2.0mm headset cable of 6.56ft plus a 0.49ft PC splitter cable. The frequency response spans 10Hz to 28kHz at 32 Ohm impedance.
Passive isolation with low sensitivity
Passive noise cancelling blocks ambient sound without active circuitry. The headphones produce 97.5 dBSPL/mW at 1 kHz, so typical PC outputs drive them to comfortable volumes. The condenser microphone measures -40.5 dBV sensitivity and mutes when the boom is swivelled upward.
DTS Headphone:X code for two years
An included activation code unlocks DTS Headphone:X spatial audio for two years, adding 3D positional cues in supported games. Memory foam ear cushions covered in soft leatherette aim to reduce pressure during long sessions. No software suite or extra accessories are bundled.
Highlights
- DTS Headphone:X spatial audio with 2-year activation code for immersive 3D positioning
- 50 mm neodymium drivers covering 10 Hz to 28 kHz for wide frequency response
- Lightweight 0.60 lb over-ear design with memory foam cushions for long-session comfort
- Swivel-to-mute condenser microphone at -40.5 dBV sensitivity for clear voice capture
- Wired 3.5 mm connection with 6.56 ft cable and 0.49 ft PC splitter for simple setup
Specifications
| Brand | HyperX |
|---|---|
| Series | HyperX Cloud Stinger 2 |
| Model | HyperX Cloud Stinger 2 |
| Part Number | 519T1AA |
| Compatibility | PC |
| Color | Black |
| LED | - |
| Connection Type | Wired |
| Connector | 3.5mm |
| Cord Length | 6.56ft, headset cable (2.0mm), 0.49ft PC PC splitter cable (3.5mm) |
| Wireless Type | Wired |
| Audio Type | DTS Headphone:X |
| Driver Unit | Dynamic, 50mm with neodymium magnets |
| Headphone Frequency Response | 10Hz-28KHz |
| Headphone Sensitivity | 97.5 dBSPL/mW at 1 kHz |
| Noise Cancelling | Passive |
| Ear Coupling | Over-the-head |
| Weight | 0.60lb |
| Microphone Sensitivity | -40.5 dBV (1 V/Pa at 1 kHz) |
| Features | HyperX Cloud Stinger 2 - Gaming Headset (Black) |
| Package Contents | Cloud Stinger 2 Gaming Headset PC extension cable DTS Headphone:X (2 year activation code) Quick Start Guide |
| Electrical Outlet Plug Type | Plug Type “A” (USA, Canada, Mexico, Japan) |
| Shipping weight | 0.59 kg |
| Package size | 254 × 229 × 127 mm |
Questions about this item
How do I install the headset and where does the 0.49 ft splitter cable connect?
Plug the headset's 3.5 mm jack into the short splitter, then insert the splitter's green and pink plugs into the PC's headphone and microphone ports.
What part of the headset will need replacement first with daily use?
The memory foam ear cushions and leatherette covering wear over time; HyperX sells official replacement pads that snap onto the 50 mm driver housings.
What is the first limitation I will hit during long gaming sessions?
Passive noise isolation depends on the circumaural seal, so background sounds leak in before the 97.5 dB sensitivity or 32 Ohm load become issues.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
GAMEPOWER
GAMEPOWER Mihawk USB Gaming Headset 7.1 Virtual Surround 16-Pack
$86.99
0.00100427BTC
In stock