We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75 mm PLA+ filament on a 2.2 kg spool

HOTFINE PLA+ Filament 1.75mm 1kg Black

SKU CH-568E-MGNQY

1.75 mm PLA+ filament on a 1 kg spool with ±0.02 mm accuracy, 99 % diameter consistency and tangle-free winding for reliable FDM printing

  • ColorBlack
  • MaterialPolylactic Acid
  • Diameter8
  • Weight2.2 pounds
  • Engineered for reliability with minimised clogs, bubbles and tangles for consistent prints
  • Precision 1.75 mm diameter with ±0.02 mm tolerance and over 99% within range
  • Self-developed neat winding system guarantees 100% neatly wound spool cutting tangle failures by 95%
  • Compatible with nearly all FDM 3D printers including Bambu Lab, Creality and Prusa
  • Recommended nozzle 200220°C, bed 4565°C, speed 50300 mm/s for optimal results

Hotfine PLA+ 1.75 mm Filament

Hotfine PLA+ filament is a polylactic-acid spool wound to 1 kg net weight with a 1.75 mm diameter. The material is formulated for higher toughness and stronger layer adhesion than standard PLA. It targets hobbyists, educators and small-batch makers who use FDM printers and want reliable results without constant tuning.

Dimensional accuracy under continuous printing

The spool holds a ±0.02 mm tolerance across the full length and over 99 % of the filament stays inside that window. Neat winding and a larger 2.20-inch centre hole cut tangle-related failures by more than 95 %. Consistent diameter keeps extrusion steady during long jobs so layers bond uniformly from first layer to last.

Heat management and power draw in normal use

Recommended nozzle temperature sits between 200 and 220 °C with a heated bed at 45 to 65 °C. Print speeds from 50 to 300 mm/s are supported without excessive cooling demands. The standard 8.00-inch spool diameter fits most holders and AMS units, so the printer’s own motion system handles feed force without extra hardware.

Highlights

  • Engineered for reliability with minimised clogs, bubbles and tangles for consistent prints
  • Precision 1.75 mm diameter with ±0.02 mm tolerance and over 99% within range
  • Self-developed neat winding system guarantees 100% neatly wound spool cutting tangle failures by 95%
  • Compatible with nearly all FDM 3D printers including Bambu Lab, Creality and Prusa
  • Recommended nozzle 200220°C, bed 4565°C, speed 50300 mm/s for optimal results

Specifications

BrandHOTFINE
ColorBlack
MaterialPolylactic Acid
Diameter8
Weight2.2 pounds

Questions about this item

How much heat does the nozzle and bed need for all-day printing with this PLA+?

The recommended nozzle temperature is 200–220 °C and the heated bed 45–65 °C, so the printer runs at moderate heat levels during long sessions.

What printer hardware must I already have to use this 1.75 mm filament?

Any FDM 3D printer that accepts 1.75 mm filament and can reach the stated nozzle and bed temperatures will work; the spool’s 8.00-inch diameter and 2.20-inch centre hole fit most holders and AMS units.

Will the ±0.02 mm tolerance cause issues on an older printer with a worn extruder?

Over 99 % of the filament stays within ±0.02 mm and the neat winding cuts tangles by more than 95 %, so even older extruders see consistent feeding and fewer clogs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.