We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20-foot balanced audio cable with 1/4 inch TRS and XLR3M connectors

Hosa Technology

Hosa Technology STX-120M 1/4 inch TRS to XLR3M Balanced Interconnect Cable 20 feet

SKU CH-908D-XZJ76

Balanced 1/4 inch TRS to XLR3M interconnect cable spans 20 feet for professional and home audio setups

  • Balanced wiring rejects noise for cleaner audio
  • 20-foot length gives flexible equipment placement
  • TRS 1/4-inch and XLR3M connectors fit mixers and amps
  • Molded strain relief protects joints during heavy use
  • Hosa Technology build quality trusted by DJs and musicians

20-Foot Balanced Audio Cable

The Hosa STX-120M is a 20-foot balanced interconnect cable built for DJs, musicians and audio enthusiasts. It links professional gear with a 3-pin XLR male connector on one end and a stereo 1/4-inch TRS male plug on the other. The moulded construction is designed to withstand regular studio and stage use. It suits setups that need a single long run between mixer and amplifier.

Signal Reach And Connector Limits

At 20 feet the cable covers typical stage or studio distances without requiring an extension. The balanced XLR-to-TRS wiring rejects common-mode noise on long runs, but the fixed length cannot be shortened or joined without extra adapters. Users needing multiple shorter segments or a different connector combination will need a separate cable. The stereo TRS end carries a balanced mono signal, not two independent channels.

Passive Construction And Power Profile

As a passive copper cable it draws no power and adds no active circuitry to the signal path. Noise performance depends on the connected equipment’s grounding and balancing rather than on the cable itself. The moulded strain relief protects the solder joints during repeated plugging and unplugging. No external power supply or driver installation is required.

Highlights

  • Balanced wiring rejects noise for cleaner audio
  • 20-foot length gives flexible equipment placement
  • TRS 1/4-inch and XLR3M connectors fit mixers and amps
  • Molded strain relief protects joints during heavy use
  • Hosa Technology build quality trusted by DJs and musicians

Specifications

No published specifications for this item yet.

Questions about this item

Will the 20-foot length reach from my mixer to my powered speaker without signal loss?

The 20-foot balanced TRS-to-XLR design rejects noise over that distance, so a mixer-to-speaker run stays clean.

How can I verify the cable is passing a balanced signal correctly after connecting it?

Plug it into a mixer channel and a powered speaker; a hum-free, stereo image with no dropouts confirms proper TRS and XLR contact.

Does the box include any adapters or do I need to buy a 1/4-inch to XLR converter separately?

The cable has a molded TRS 1/4-inch male on one end and an XLR3M male on the other, so no extra adapters are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.