Honeywell
Honeywell T410B1004 Electric Heat Thermostat with Pos Off Switch
Line-voltage electric-heat thermostat covering 40 to 80 °F with positive-off switch and colour-coded leads for 120/208/240/277 V systems
- TypeWiFi Thermostats
- Reliable line-voltage control across 120/208/240/277 V AC systems
- Snap-action switch activates heating on temperature fall for consistent comfort
- Simple installation using 150 mm colour-coded leads
- Long-lasting Micro Switch mechanism extends service life
- Replaces any 2-wire T410A or T410B wall-mounted electric heating thermostat
Line-voltage electric heat thermostat
The Honeywell T410B1004 is a single-stage line-voltage thermostat designed for resistive electric heating systems. It operates on 120, 208, 240, or 277 Volt AC supplies and covers a 40 to 80 degree Fahrenheit range. A snap-action switch activates the heating circuit when the temperature falls.
Installers replacing two-wire wall stats
This unit suits electricians or DIYers swapping out existing two-wire T410A or T410B models. The 150 mm colour-coded leads and rugged plastic base simplify the changeover. Buyers controlling heat pumps, hydronic systems, or low-voltage circuits cannot use this thermostat.
120/208/240/277 Volt AC line-voltage rating
The thermostat only works with line-voltage resistive heating loads within the stated voltage range. Connecting it to a different voltage or a low-voltage system will prevent correct operation. Verify the supply voltage matches one of the four listed values before purchasing.
Highlights
- Reliable line-voltage control across 120/208/240/277 V AC systems
- Snap-action switch activates heating on temperature fall for consistent comfort
- Simple installation using 150 mm colour-coded leads
- Long-lasting Micro Switch mechanism extends service life
- Replaces any 2-wire T410A or T410B wall-mounted electric heating thermostat
Specifications
| Type | WiFi Thermostats |
|---|
Questions about this item
Does the Honeywell T410B1004 generate any audible noise or heat when controlling electric heat all day?
The snap-action switch operates silently with no fan or active cooling, so it adds no perceptible noise or heat to the room.
What existing wiring must be in place for the Honeywell T410B1004 to work?
A 2-wire line-voltage circuit at 120, 208, 240 or 277 V AC is required; the thermostat includes 150 mm colour-coded leads for connection.
Can the Honeywell T410B1004 replace an older T410A or T410B model directly?
Yes, it is designed to replace any 2-wire T410A or T410B line-voltage wall-mounted electric heating thermostat using the same mounting base.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
