We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Honeywell OmniProx RFID reader, gang box mount, black grey ivory finish

Honeywell

Honeywell OP40HONS OmniProx RFID Reader 12V Gang Box Mount

SKU CH-VYQW-V3B4E MPN OP40HONS

A 12 V gang-box proximity reader that mounts in a standard US electrical box and reads credentials at the door

  • Form FactorGang Box Mount
  • Gang-box mount fits standard US electrical boxes
  • 12 V DC operation integrates with access control systems
  • Proximity identification reads cards without contact
  • Slim 0.6" depth suits shallow wall cavities
  • Black, gray or ivory finishes match interior décor

Door Access Reader

The Honeywell OP40HONS OmniProx is a proximity card reader designed for door access control. It mounts directly onto a standard US gang box for straightforward installation. The unit operates on 16 V DC input and weighs approximately 9.60 oz. Available in black, gray or ivory, it suits commercial and institutional entry points.

Continuous Operation

Under sustained use the reader maintains consistent proximity identification without requiring a cool-down period. The gang box mount dissipates heat passively through the wall cavity, supporting uninterrupted scanning during peak traffic. Its 12V nominal design tolerates the specified 16 V DC supply continuously. No moving parts or fans are present to wear or fail over time.

Wiring Constraints

The device requires a two-wire connection to a compatible access control panel supplying 16 V DC. Cable length is limited by voltage drop on the low-voltage circuit; excessive runs will prevent reliable operation. The shallow 0.6 in depth fits standard gang boxes but leaves no room for extra splices or thick insulation. Polarity must be observed during termination.

Highlights

  • Gang-box mount fits standard US electrical boxes
  • 12 V DC operation integrates with access control systems
  • Proximity identification reads cards without contact
  • Slim 0.6" depth suits shallow wall cavities
  • Black, gray or ivory finishes match interior décor

Specifications

BrandHoneywell
Form FactorGang Box Mount
Shipping weight0.35 kg
Package size125 × 109 × 72 mm

Questions about this item

How much heat or noise does the OP40HONS produce when running continuously on a door?

The reader draws 16 V DC with no moving parts, so it generates negligible heat and no audible noise during all‑day operation.

What existing wiring or power supply must be in place for the OP40HONS to work?

A 16 V DC source wired to a standard US gang box is required; the unit mounts directly to that box.

Will the OP40HONS fit alongside an older panel mounted in the same gang box?

At 4.3 in tall, 3 in wide and .6 in deep, it matches a standard gang‑box footprint and leaves adjacent boxes unaffected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.