We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polished brass base with clear crystal ball finial, two inches tall

Home Concept

Home Concept Lamp Finial Crystal Ball Polished Brass 2"h

SKU CH-X6GC-35GH8

Crystal ball finial with polished brass base secures lampshades using standard 1/4"-27 threads, fitting 95% of harps

  • TypeIncandescent Lamps
  • Completes any lamp with a sparkling crystal ball accent
  • Polished brass base coordinates with most existing lamp harps
  • Compact 2-inch height suits standard table and floor lamps
  • Secures the shade firmly using standard 1/4"-27 threads
  • Installs in seconds by simply screwing onto the harp

Polished Brass Crystal Finial

This new Home Concept finial tops table or floor lamps with a genuine Stephanov crystal ball and a polished brass base. The piece is designed for anyone refreshing a favourite lamp or completing a new shade setup. It secures the shade to standard harps using a 1/4"-27 thread. Buyers needing a larger decorative scale or a different material finish will not find it here.

Standard Thread Compatibility

The 1/4" wide opening with 27 threads per inch fits the harp on almost every lamp, covering roughly 95% of common hardware. No extra adapters or tools are required because the finial screws on and off by hand. This universal thread means the accessory works with existing lamps without modification. Shades mounted on non-standard harp sizes cannot use this finial.

Crystal Ball Build and Daily Use

The crystal ball measures 7/8" wide and the overall height is 2", keeping the profile proportional for most standard lamps. Polished brass resists tarnish and matches typical harp finishes for a cohesive look. The small threaded opening allows quick removal when changing shades or cleaning. Lamps with harps thicker than 1/4" or with a different thread pitch will not accept this finial.

Highlights

  • Completes any lamp with a sparkling crystal ball accent
  • Polished brass base coordinates with most existing lamp harps
  • Compact 2-inch height suits standard table and floor lamps
  • Secures the shade firmly using standard 1/4"-27 threads
  • Installs in seconds by simply screwing onto the harp

Specifications

TypeIncandescent Lamps

Questions about this item

Will the 1/4"-27 threaded base need replacement if the threads strip?

The brass base uses standard 1/4"-27 threads; if they wear, the entire finial must be replaced because the crystal ball is fixed to the base.

What stops the crystal ball from loosening on the harp during daily vibration?

The 27 threads-per-inch engagement and snug 1/4" bore hold the finial firmly; 95% of standard harps match this pitch.

Does the polished brass base discolour or the crystal cloud after the lamp runs all day?

Brass may develop a natural patina over time; the genuine Stephanov crystal resists heat-induced clouding from normal incandescent use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.