We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plug-in swag conversion kit with 17-foot cord, rocker switch, double sockets and mounting hooks

Home Concept

Home Concept 2 Light Swag Conversion Kit Plug-In Ceiling Light Cord White

SKU CH-GJ3H-SXG28

Convert a washer-fitter lampshade into a plug-in swag pendant with 17' white cord, rocker switch 34" from the plug, and double sockets for two 150 W bulbs

  • FinishWhite
  • StyleModern
  • Lamp Quantity2 Lights
  • FeaturesIndoor
  • Convert any washer-fitter shade to a plug-in swag pendant
  • 17-foot white cord with rocker switch 34 inches from the plug
  • Double sockets accept two 150-watt CFL or LED Edison bulbs
  • ETL-approved components with grounded three-prong plug for safety
  • No wiring required — ideal for dorms and apartments

Convert Lampshades To Plug-In Swag

This kit turns any washer-fitter lampshade into a plug-in hanging pendant. It suits renters, dorm residents or anyone who cannot run new wiring. The white finish and modern style blend with most decors. No electrical work is required for installation.

Install Hooks And Plug In

Mount the supplied hooks and anchors, then plug the three-prong cord into a standard outlet. The rocker switch sits 34 inches from the plug for easy reach. Double sockets accept two 150 watt Edison-base CFL or LED bulbs, which are not included. ETL-approved components provide grounded safety.

Check Shade Dimensions First

Verify your shade uses a spider fitter and measures roughly 14 inches wide at the bottom and 11 inches at the top. Included threaded rods in 1, 5 and 6.5 inch lengths secure a diffuser on shades about 10 to 12 inches high. The 15 or 17 foot cord length must reach your outlet from the chosen hanging point.

Highlights

  • Convert any washer-fitter shade to a plug-in swag pendant
  • 17-foot white cord with rocker switch 34 inches from the plug
  • Double sockets accept two 150-watt CFL or LED Edison bulbs
  • ETL-approved components with grounded three-prong plug for safety
  • No wiring required — ideal for dorms and apartments

Specifications

FinishWhite
StyleModern
Lamp Quantity2 Lights
FeaturesIndoor

Questions about this item

How do I verify the swag conversion kit is working correctly after installation?

Plug the three-prong cord into a standard outlet and press the rocker switch located 34 inches from the plug; both sockets should power your installed bulbs immediately.

What components are included in the box and what must I purchase separately?

The kit includes hooks, anchors, a 17-foot white cord with rocker switch, double sockets, a 6.5-inch threaded rod, a 5-inch threaded rod, and a 1-inch rod with cap; you must buy two 150-watt Edison-base CFL or LED bulbs separately.

Which threaded rod length should I choose for my lampshade height?

Use the 5-inch or 6.5-inch rod for shades 10 to 12 inches high with a diffuser, or the 1-inch rod and cap if you are not using a diffuser.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.