Holland Electronics
Holland Electronics Satellite Diplexer Pack of 2
Two diplexers combine satellite and TV signals over one cable, passing 28 V DC up to 2 amps for Dish Pro systems
- ColorSilver
- Weight0.25
- Passes 28 V DC up to 2 amp on satellite port
- Combines satellite and TV signals over a single cable
- Designed for Dish Pro and Dish Pro Plus systems
- Low insertion loss with high return loss
- Pack of two diplexers included
Satellite Diplexer Pack of 2
This pack contains two Holland Electronics satellite diplexers designed for Dish Pro and Dish Pro Plus systems. They combine or separate satellite and off-air TV signals over a single coaxial cable run. Installers can avoid pulling a second wire, saving labour time on site. Each unit is DISH Network approved for DP44 switch installations.
Check your system uses Dish Pro or Dish Pro Plus
Verify that your installation uses a DP44 switch before ordering. The diplexer passes 28 V DC on the satellite port with a 2 amp maximum rating. Confirm your cabling and connectors are compatible with the 950 to 2150 MHz frequency range. Ensure you have two available locations where a single coax feed must carry both signal types.
Low insertion loss and high return loss
The diplexer provides low insertion loss and high return loss to maintain signal quality. Increased stop-band isolation filters harmonics from satellite conversion devices. The 28 V DC pass capability supports powered LNBs without burning out the unit. Silver colour-coded insulators help identify connections during installation.
Highlights
- Passes 28 V DC up to 2 amp on satellite port
- Combines satellite and TV signals over a single cable
- Designed for Dish Pro and Dish Pro Plus systems
- Low insertion loss with high return loss
- Pack of two diplexers included
Specifications
| Brand | Holland Electronics |
|---|---|
| Color | Silver |
| Weight | 0.25 |
Questions about this item
What comes in the pack and do I need any extra cables?
The pack contains two Holland Electronics satellite diplexers. No extra cables are included, so you will use your existing coaxial runs.
How do I decide between the two diplexers in the pack?
Both units are identical DPD2 models approved for DP44 switches, so either one works for a single satellite feed.
What does the 28 V DC pass at 2 A mean for my receiver?
It lets the diplexer carry up to 2 amps of 28 V power from the receiver to the LNB through the satellite port without burning out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



