We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum cross pipe fitting, gray mill finish, 1 inch pipe size

Hollaender

Hollaender 32510 Structural Pipe Fitting Cross Aluminum 1 in

SKU CH-CGK7-E0QG9

Aluminium cross fitting joins four 1-inch pipes at right angles, weighs 0.39 lb and meets ASTM B179 535

  • Weight0.39
  • Corrosion-resistant aluminium extends outdoor service life
  • Offset cross design connects four 1 in pipes at right angles
  • ASTM B179 535 alloy ensures consistent mechanical strength
  • Lightweight 0.39 lb fitting simplifies handling and installation
  • Mill-finish grey surface ready for paint or clear coat

Structural Cross Fitting

The Hollaender 32510 is an aluminum cross fitting designed to join four sections of 1 inch nominal pipe. It provides a corrosion-resistant connection for structural frameworks and outdoor installations. The gray mill finish suits exposed environments.

Outdoor Builders and Maintenance Teams

This fitting suits crews assembling railings, canopies or storage-shed frames where 1 inch pipe is specified. It is not for installers who need a tee, elbow or adjustable-angle connector. Buyers working with metric tube or threaded pipe should look elsewhere.

ASTM B179 535 Alloy Verification

The single specification that decides fit is the ASTM B179 535 aluminum alloy designation. Confirm that your project specification calls for this exact alloy before ordering. The 1 3/8 inch actual outer diameter and 1 7/8 inch overall length follow from that standard.

Highlights

  • Corrosion-resistant aluminium extends outdoor service life
  • Offset cross design connects four 1 in pipes at right angles
  • ASTM B179 535 alloy ensures consistent mechanical strength
  • Lightweight 0.39 lb fitting simplifies handling and installation
  • Mill-finish grey surface ready for paint or clear coat

Specifications

BrandHOLLAENDER
Weight0.39

Questions about this item

Will the aluminum cross fitting need periodic re-coating to maintain corrosion resistance?

The fitting is made from corrosion-resistant aluminum per ASTM B179 535, so no additional coating is required for the life of the installation.

What structural limit is reached first when the cross is under continuous load?

The cross is a non-moving connection fitting; its limit is the shear capacity of the 1 3/8 in inside diameter joint, not a thermal or wear threshold.

Does the aluminum cross generate heat or noise when left in place all day?

As a passive structural fitting with no moving parts or electrical components, it produces zero noise, zero heat and draws no power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.