HOFFMAN
HOFFMAN CSD16126 NEMA 4 12 13 16.0x12.0x6.0 in Wall Mount Electrical Box
Wall-mount carbon-steel enclosure rated NEMA 4, 12 and 13 with IP66 protection, 16.0×12.0×6.0 in, quarter-turn latch and grounding hardware included
- TypeElectrical Boxes & Enclosures
- NEMA 4 12 13 rating protects against dust water and oil
- IP66 rating ensures high-pressure water jet resistance
- Carbon steel construction with ANSI 61 polyester powder finish resists corrosion
- Hinged cover with quarter-turn latch allows quick tool-free access
- Includes grounding hardware and interior panel 32FK10 for immediate installation
HOFFMAN CSD16126 NEMA Enclosure
The HOFFMAN CSD16126 is a carbon steel wall-mount electrical box rated NEMA 4, 12 and 13 with an IP66 rating. It measures 16.0 in H x 12.0 in W x 6.0 in D and features a solid hinged cover secured by 1/4-turn latches with screwdriver slots. The ANSI 61 polyester powder finish in gray provides corrosion resistance, while a polyurethane gasket seals the enclosure. Grounding hardware and sealing washers are included, and the unit ships with a 32FK10 interior panel. It carries CSA, cUL, IEC and UL certifications.
Indoor Industrial and Commercial Installations
This enclosure suits installers protecting electrical components in indoor industrial or commercial environments where dripping water, dust, oil or coolant are present. The NEMA 12 and 13 ratings address these specific contaminants. It is not intended for outdoor exposure to windblown dust, rain or sleet without additional verification, nor for hazardous locations requiring explosion-proof construction. Buyers needing a transparent cover for visual inspection or a larger internal volume should evaluate alternative models.
Pre-Installation Checks
Verify the mounting surface can support the 14/16/18 gauge carbon steel construction and plan for the 16.0-inch height and 12.0-inch width footprint. Confirm the 1/4-turn latch mechanism meets your access and security requirements. Ensure the included 32FK10 interior panel matches your component layout or that a compatible substitute is sourced. Check that the ANSI 61 gray finish aligns with any facility colour-coding standards.
Highlights
- NEMA 4 12 13 rating protects against dust water and oil
- IP66 rating ensures high-pressure water jet resistance
- Carbon steel construction with ANSI 61 polyester powder finish resists corrosion
- Hinged cover with quarter-turn latch allows quick tool-free access
- Includes grounding hardware and interior panel 32FK10 for immediate installation
Specifications
| Brand | NVENT HOFFMAN |
|---|---|
| Type | Electrical Boxes & Enclosures |
Questions about this item
What mounting hardware must I already have to install this 16.0 in H x 12.0 in W wall-mount enclosure?
The box includes grounding hardware and sealing washers; you supply the lag bolts or anchors sized for the four rear mounting holes and the wall material you are fastening to.
Can I reuse my existing 12 in interior panel instead of the supplied 32FK10 panel?
The enclosure is designed around the included 32FK10 panel; a different panel would need identical mounting hole spacing and dimensions to fit the 14/16/18 ga carbon-steel interior.
How do I verify the NEMA 4, 12, 13 and IP66 seal is intact after closing the hinged cover?
Engage the 1/4-turn latch until the screwdriver slot is horizontal; the polyurethane gasket should compress evenly around the full 16.0 x 12.0 in perimeter with no visible gaps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



