We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel electrical enclosure, 24 by 24 by 6 inches, gray finish, screw-on cover

HOFFMAN

HOFFMAN ASG24X24X6NK electrical box 24 in H 6 in D

SKU CH-ABKZ-3VR5P

Wall-mount carbon-steel enclosure, NEMA Type 1 and IP30 rated, with screw-latch cover and captive screws, 24 in high by 24 in wide by 6 in deep, 12/14/16 ga galvanised finish.

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA Type 1 rating protects indoor wiring from dust and light contact
  • Carbon steel body with galvanized finish resists corrosion in dry environments
  • Screw-on solid cover with captive screws secures enclosure without loose hardware
  • cUL listed to UL 50, 50E and CSA C22.2 No 40 for code compliance
  • 24 by 24 by 6 inch dimensions suit wall-mount junction or pull-box layouts

HOFFMAN ASG24X24X6NK Wall-Mount Enclosure

The HOFFMAN ASG24X24X6NK is a carbon-steel electrical enclosure built for indoor wall-mount applications. It measures 24 inches high, 24 inches wide and 6 inches deep with a galvanized gray finish. The unit carries a NEMA Type 1 rating and an IP30 rating for basic protection against solid objects. Screw-on cover latches and pre-drilled mounting holes simplify installation.

Indoor Installations Needing Basic Protection

This enclosure suits electricians and contractors running wiring or junction boxes inside dry commercial or residential buildings. The solid cover and screw closure keep dust and accidental contact away from live parts. Buyers who need protection against water, oil, corrosion or outdoor exposure should look at higher-rated enclosures. The single-door design also limits internal space for very large component arrays.

NEMA Type 1 and IP30 Rating Decides Suitability

The NEMA Type 1 and IP30 ratings define the environments this box can safely serve. They confirm protection against falling dirt and access to hazardous parts but not against dripping water or harsh conditions. Matching the enclosure rating to the site classification is the single specification that determines whether this part is correct for the job.

Highlights

  • NEMA Type 1 rating protects indoor wiring from dust and light contact
  • Carbon steel body with galvanized finish resists corrosion in dry environments
  • Screw-on solid cover with captive screws secures enclosure without loose hardware
  • cUL listed to UL 50, 50E and CSA C22.2 No 40 for code compliance
  • 24 by 24 by 6 inch dimensions suit wall-mount junction or pull-box layouts

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

How is the NEMA Type 1 steel enclosure mounted and what step do installers often miss?

Mount the 24 in by 24 in box using the pre-drilled mounting holes; the step often missed is torquing the captive screw latches evenly to maintain the IP30 seal.

What maintenance will the galvanized carbon steel enclosure need over time?

Inspect the gray galvanized finish periodically for scratches or corrosion, especially at the 12/14/16 ga edges, and touch up any bare metal to preserve the NEMA 1 rating.

What limit appears first when the enclosure runs continuously in a warm indoor space?

The IP30 rating only protects against solid objects; sustained heat buildup inside the 6 in deep cavity becomes the limiting factor before the cUL listing is affected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.