We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray galvanized steel electrical enclosure, 12 by 12 inches, screw-on solid cover, captive screws, mounting holes visible

HOFFMAN

HOFFMAN ASG12X12X6 Captive Screws Electrical Box 12 in H 6 in D

SKU CH-5K9P-DRR8F

A wall-mount carbon-steel enclosure with captive-screw solid cover, NEMA Type 1 and IP30 rated, measuring 12 in high by 12 in wide by 6 in deep

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA Type 1 rating suits indoor wall-mount applications
  • Carbon-steel body with galvanized finish resists corrosion
  • Captive screw-latch cover speeds installation and removal
  • cUL listed to CSA C22.2 No 40 and UL 50/50E standards
  • 12 in × 12 in × 6 in enclosure provides ample wiring space

12-inch square galvanized enclosure

The NVENT HOFFMAN ASG12X12X6 is a carbon-steel electrical box with a solid screw-on cover and captive screws. It carries a NEMA Type 1 rating and an IP30 rating for indoor protection against solid objects. The 12-inch height, width and 6-inch depth provide space for junction wiring or small control components. A gray galvanized finish resists corrosion in dry indoor environments.

Before ordering check mounting and standards

Verify that the 12-inch square footprint fits the available wall area and that the 6-inch depth clears any obstructions. The unit uses mounting holes for surface installation and is cUL listed per CSA C22.2 No 40, UL 50 and 50E, and IEC 60529. Confirm these standards satisfy local code requirements for the intended circuit. The 12/14/16 gauge steel thickness should match the mechanical protection needed.

Suits indoor junction boxes not wet locations

This enclosure suits electricians and panel builders needing a listed indoor junction or pull box with a secure screw latch cover. It is not for buyers who need a higher ingress rating such as NEMA 3R or 4X for wet or wash-down areas. It is also not for installers who require a hinged or quick-release cover for frequent access.

Highlights

  • NEMA Type 1 rating suits indoor wall-mount applications
  • Carbon-steel body with galvanized finish resists corrosion
  • Captive screw-latch cover speeds installation and removal
  • cUL listed to CSA C22.2 No 40 and UL 50/50E standards
  • 12 in × 12 in × 6 in enclosure provides ample wiring space

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

What comes in the box and what must be purchased separately?

The enclosure is supplied as a complete unit with its solid cover, captive screw latches and pre-drilled mounting holes. Internal panels, DIN rails, cable glands or any other accessories are not included and must be ordered separately.

Which size or configuration should I choose for my installation?

This model provides a 12 in by 12 in by 6 in carbon-steel enclosure rated NEMA Type 1 and IP30. Select it when those exact dimensions and indoor-only protection match the space and environment of your project.

What does the NEMA Type 1 and IP30 rating mean once the box is mounted?

The ratings confirm the enclosure shields live parts from accidental contact and blocks solid objects in dry indoor settings. It is not rated for water, oil, dust or outdoor exposure, so install it only in clean, dry interior locations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.