We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray metal wall-mount enclosure 10x10x6 with screw cover

HOFFMAN

HOFFMAN ASG10X10X6NK Electrical Enclosure 10x10x6 Gray

SKU CH-R75Z-PV0HJ

Wall-mountable carbon-steel enclosure rated NEMA 1 and IP30 with screw-latch cover and mounting holes

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA Type 1 rating suits indoor electrical installations
  • cUL listed to CSA C22.2 No 40 and UL 50, 50E standards
  • Carbon steel body with galvanized finish resists corrosion
  • Screw-on cover with captive screws secures enclosure quickly
  • Pre-drilled mounting holes simplify wall-mount setup

Compact Steel Enclosure for Indoor Wiring

The Hoffman ASG10X10X6NK is a carbon-steel electrical enclosure rated NEMA Type 1 and IP30 for indoor use. Its 10 by 10 by 6 inch body provides a protected cavity for junction boxes, terminal strips or small control devices. The galvanized grey finish resists corrosion in dry commercial or light-industrial settings. Wall-mounting holes allow direct attachment to flat surfaces.

Passive Thermal Behaviour

No fans or vents are fitted, so heat escapes only through the solid steel walls and screw-on cover. In normal operation the enclosure remains silent and draws no power of its own. The 12 to 16 gauge metal conducts warmth away from internal components without creating audible noise. Ambient temperature and internal dissipation determine the steady-state temperature rise.

Sustained Load Considerations

Under continuous load the internal air temperature will stabilise above ambient depending on the total wattage of installed equipment. The solid cover and screw-latch closure maintain the IP30 barrier but limit convective airflow. Installers should verify that component ratings are not exceeded at the expected equilibrium temperature. The cUL listing to UL 50 and CSA 22.2 No 40 confirms compliance for the declared enclosure class.

Highlights

  • NEMA Type 1 rating suits indoor electrical installations
  • cUL listed to CSA C22.2 No 40 and UL 50, 50E standards
  • Carbon steel body with galvanized finish resists corrosion
  • Screw-on cover with captive screws secures enclosure quickly
  • Pre-drilled mounting holes simplify wall-mount setup

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

How do I mount the enclosure and what is the common mistake with the captive screws?

Use the pre-drilled mounting holes for wall mounting; the captive screws on the cover are for the latch only and must not be used to secure the box to the wall.

What part will need replacement first and how often?

The screw-latch hardware on the solid cover may wear from repeated opening; inspect the captive screws and threads during routine maintenance and replace if stripping appears.

What is the first limit reached under continuous indoor operation?

The NEMA Type 1 and IP30 ratings restrict use to dry, indoor environments; sustained humidity, condensation, or dust ingress beyond solid objects will exceed the enclosure's protection limits.

More in Electrical Boxes

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.